Model-specific code library

Thermador cooktop error codes.

We decode 19 Thermador cooktop entries.

Cooktop code finder

A bare "D" or "E" on a Thermador electric cooktop display marks an operating problem without a number. Switch the cooktop off and on again; if it was a one-off, the message goes away.

Read the D or E checks
Or choose

23 researched cooktop codes. What a panel message means depends on the model, so rely on the manual that came with yours.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

D or E

Messages

A bare "D" or "E" on a Thermador electric cooktop display marks an operating problem without a number. Switch the cooktop off and on again; if it was a one-off, the message goes away.

Check first
dE

Modes and limits

dE on a Thermador cooktop means demo mode is on, so the cooking zones stay cold. Switch the breaker or fuse off for 30 seconds, restore it, and touch any control within 3 minutes.

Check first
E7010

Connection

E7010 means a Thermador cooktop cannot reach your home Wi-Fi network or the hood. Switch the cooktop off and on again; a one-off message disappears by itself.

Check first
E7015

Overheating

E7015 means the electronics of a Thermador induction cooktop overheated and the related cooking zone was switched off. Wait for the electronics to cool, touch a control, and cook again once the message is gone.

Cool down, then book
E8204

Cooking sensor

E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.

Informational
E8205

Cooking sensor

E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.

Check first
E8206

Cooking sensor

E8206 means Thermador's page calls the wireless cooking sensor faulty. Unlike the battery and connection messages next to it, it offers no owner step. Note the display and book a visit.

Book a visit
E8207

Overheating

E8207 is one of five codes Thermador lists for overheated electronics on induction cooktops: the related cooking zone has shut off. Let the electronics cool, touch any control, and cook once the message has gone.

Cool down, then book
E8208

Overheating

E8208 is listed with F2, F4, E7015 and E8207 as an electronics overheating message on Thermador induction cooktops. The related zone is off; wait for it to cool, touch any control, then carry on.

Cool down, then book
E9000

Power supply

E9000 means the supply voltage reaching a Thermador cooktop is outside its normal range. The Thermador manual names no owner step; have the supply checked by an electrician and book a visit.

Check supply
E9010

Power supply

E9010 uses the same wording as E9000: the supply voltage is out of the cooktop's normal range. Have the supply checked and book a visit; the Thermador manual has no owner step.

Check supply
E9011

Power supply

E9011 means a Thermador cooktop is not connected properly. Disconnect it from power and compare the connection with the circuit diagram.

Book a visit
F0

Modes and limits

F0 means MoveMode® is not activated on a Thermador induction cooktop. Touch any button to acknowledge it; you can keep cooking as normal without MoveMode®.

Informational
F1

Overheating

F1 on a Thermador induction cooktop means a cooking zone overheated and switched itself off to protect the work surface. Give the electronics time to cool down before you turn the zone back on.

Cool down, then book
F2

Overheating

F2 on a Thermador electric cooktop means the electronics overheated and the related cooking zone was switched off. Wait until the electronics cool, then touch any control.

Cool down, then book
F4

Overheating

F4 on a Thermador electric cooktop means the electronics overheated and all cooking zones switched off. Wait for the electronics to cool, then touch any control.

Cool down, then book
F5 with heat level and signal tone

Overheating

F5 shown with the heat level and a tone on a Thermador electric cooktop is a warning: hot cookware near the controls puts the electronics at risk. Move the cookware away from the control panel.

Check first
F5 and power level flashing with signal tone

Overheating

F5 alternating with the power level and a tone on a Thermador induction cooktop warns that hot cookware sits near the control panel. Remove it from the panel and you can keep cooking.

Check first
F5 and signal tone

Overheating

F5 with a tone and no flashing means hot cookware near the control panel already made the cooking zone switch off to protect the electronics. Remove the cookware, wait a few seconds, then touch any control.

Check first
F6

Overheating

F6 means a cooking zone overheated and shut itself off to protect the work surface, in the same wording Thermador uses for F1. Wait for the electronics to cool, then switch the zone back on.

Cool down, then book
F8 + H/h

Modes and limits

F8 with H or h means a cooking zone ran for a long time without any input and the automatic time limit switched it off. Tap any control, then set the zone again.

Informational
F9

Modes and limits

F9 means the extended Flex Zone on a Thermador induction cooktop does not switch on. Touch any button to confirm the message and keep cooking on the other zones.

Check first
U400

Power supply

U400 means the supply voltage is outside the cooktop's normal range, in the wording E9000 and E9010 share. No owner step is printed; have the supply checked by an electrician.

Check supply

Start with the model boundary.

Cooktops in a thoughtfully designed home

Thermador cooktop codes come from two support pages.

We decode 19 Thermador cooktop entries.

We read Thermador's induction and electric cooktop error-code pages, which list no models. No gas cooktop page exists on thermador.com, so no gas cooktop code is covered.

Choose the next safe action.

Read the whole display

Say whether the cooktop is induction or electric, and whether the display shows F5 with a tone or a flashing level.

Respect the service boundary

Cooking zones and cookware stay hot, and wiring is for a qualified person.

Documents checked for this library.

  • Error Codes | Electric Cooktops Support | Thermador
  • Error Codes | Induction Cooktops Support | Thermador

Match your model to the guide it shipped with. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these cooktop meanings universal?

We read Thermador's induction and electric cooktop error-code pages, which list no models. No gas cooktop page exists on thermador.com, so no gas cooktop code is covered.

What details should I pass along for a cooktop message?

Photograph the entire cooktop panel along with the rating plate. Note what the appliance was doing when the message came up, and do not lean on the explanation for a different unit.

What does it mean when a cooktop message has no explanation beside it?

A phrase people once typed into a search box is not evidence from the manufacturer. When our cooktop manuals leave a message unexplained, we print its name, send you toward help and name no cause.

How do I know which cooktop models a manual covers?

Open the Thermador manuals in this cooktop library and match the model printed on each cover to your rating plate. A different series comes with its own use-and-care guide.

Let’s take care of it.

One burner, two burners,
or the whole range.