Start from the symptom
Thermador cooktop induction cooktop humming or buzzing.
Thermador says humming, buzzing and crackling on an induction cooktop come from the cookware and are normal, not a sign of malfunction. A whistle means an empty pan on a live zone and stops once you add food or water. The Freedom guide ties a deep hum to high power or a pan too small for the zone.

Start with safe observations.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Note which sound it is
Thermador's guide separates a transformer-like hum, a deep hum, a quiet whistle, crackling, fan noise and occasional clicks.
- 2
Lower the power level
A deep hum like a transformer happens at a high power level and eases when you reduce it.
- 3
Check the pan size
A deep hum can mean cookware too small or unsuitable for induction. Move it to another spot or use a larger pan.
- 4
Add water or food
A quiet whistle comes from empty cookware on an active zone and goes away once there is something in the pan.
- 5
Keep the cooktop fan going
Fan noise is normal. It can keep spinning after switch-off while the electronics still read too warm.
Systems a technician may investigate.
Part names come only after the technician has examined the cooktop in person. The quote comes first; nothing is ordered unless you agree.

STAR burner
STAR burner is Thermador's name for the sealed gas burner on its rangetops, ranges and gas cooktops. The rangetop guide says no burner parts under the surface need cleaning or adjusting. When one burner stays dark, Thermador's support page checks the burner cap first.

Gas burner igniter
Thermador gas burners light with electronic igniters. The guides say they are fragile, spark when a burner is turned on, and should be cleaned with a damp cotton swab. Constant sparking has a short list of causes on the support page. Never take a gas appliance apart.

ExtraLow burner
An ExtraLow (XLO) burner is a Thermador STAR burner that cycles its flame on and off to hold a very low temperature. A slightly taller flame at simmer than on a standard burner is normal. These burners cannot be lit by hand during a power failure.

Induction cooking sensor
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
If the display adds a code.
No message is tied directly to this topic.
No other researched dishwasher message is tied to this topic. Compare the exact wording with your model's manual and never substitute another message from the library.
See the research statusRead the related care guide.

Induction zone dark? Wait, touch, or call
On a Thermador induction cooktop, F1, F6, F2, F4 and F5 mean the electronics or the glass got too hot, so you let them cool and touch a control. F8 with an H or h is a time limit that one touch resets. Other codes need a technician. [1][3][4]

dE, UP, SAB, LOCK, Demo: not errors
dE, UP, Sabbath, Lock and Demo are settings or notices in Thermador's pages and manuals, not errors. dE and Demo stop heating or cooling on purpose, UP reports a software update, and Sabbath and Lock switch off buttons and alarms. Each one clears with a short step. [1][3][5][6][7]
When observation becomes a service request.
Leave internal testing to a technician.
The noise is new, loud and does not change with a different pan or a lower power level.
A message shows on the display along with the noise.
The cooktop shuts off a zone while it hums.
Arrange a diagnosticSources and model boundaries.
These documents back up the Thermador induction cooktop humming or buzzing guidance. Choose the manual written for your model.
- Troubleshooting | Induction Cooktops Support | Thermador
- Use and care guide, Freedom Induction cooktop CIT36YWB CIT36YWBB (en-us)
Match your model to the guide it shipped with. See how we research these pages.
Is a buzzing induction cooktop broken?
Thermador's support page says humming, buzzing or crackling comes from the cookware and is not a sign of malfunction. The amount of food and the cooking method change how loud it gets.
Why does my cooktop whistle?
Thermador links a whistle to empty cookware on an active heating element. It disappears when you add food or water to the pan.
Why is a loud whistle heard at maximum power?
The Freedom guide says loud whistling can appear with two zones at maximum power at once, and it eases or stops when you turn the power down.
Does crackling mean damage to the glass?
Not according to the Freedom guide. It ties crackling to cookware made of different layered materials or pans of different sizes and materials.
Why does the fan run after I switch off?
The support page calls that normal. The fan cools the cooktop electronics and carries on while the measured temperature stays too high.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Cooktop repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.