Before work starts
Your technician reviews the issue with you and settles the cost before any repair starts. For built-in units the final figure comes after an on-site look.
Independent appliance repair
Book a visit for a Thermador induction, electric or gas cooktop that shows F1, F5, E9000, E8206 or dE, or has a burner that stays dark. We cover the codes Thermador prints for induction and electric cooktops. Gas and supply voltage checks start with safety.


When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.

Thermador's page lists four causes for sparking that will not stop or starts with the cooktop off: knobs left in the lighting or spark position, a draft working on the re-ignition feature, water on the surface, or a knob held down past the child lock position. Dismantling a gas appliance is a job for a trained technician.

Thermador says humming, buzzing and crackling on an induction cooktop come from the cookware and are normal, not a sign of malfunction. A whistle means an empty pan on a live zone and stops once you add food or water. The Freedom guide ties a deep hum to high power or a pan too small for the zone.
dE on a Thermador cooktop means demo mode is on, so the cooking zones stay cold. Switch the breaker or fuse off for 30 seconds, restore it, and touch any control within 3 minutes.
E7010 means a Thermador cooktop cannot reach your home Wi-Fi network or the hood. Switch the cooktop off and on again; a one-off message disappears by itself.
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.
Part names come only after the technician has examined the cooktop in person. The quote comes first; nothing is ordered unless you agree.

STAR burner is Thermador's name for the sealed gas burner on its rangetops, ranges and gas cooktops. The rangetop guide says no burner parts under the surface need cleaning or adjusting. When one burner stays dark, Thermador's support page checks the burner cap first.

Thermador gas burners light with electronic igniters. The guides say they are fragile, spark when a burner is turned on, and should be cleaned with a damp cotton swab. Constant sparking has a short list of causes on the support page. Never take a gas appliance apart.

An ExtraLow (XLO) burner is a Thermador STAR burner that cycles its flame on and off to hold a very low temperature. A slightly taller flame at simmer than on a standard burner is normal. These burners cannot be lit by hand during a power failure.

The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
What to expect.
Every step explained in advance.

Choose your appliance, whether range, oven or refrigeration, and tell us how it is behaving.

The technician inspects the unit, reviews the cause with you and agrees the cost before starting the work.

After the repair, the technician tests the appliance and explains the result, so you know what changed.
F1, F6, F2, F4 and F5 are overheat entries. Thermador says to wait for the electronics to cool and move hot cookware off the control panel.
E9000, E9010 and U400 point to voltage outside the normal range. Thermador lists no owner step; an electrician checks the supply.
On dE the cooktop is in demo mode. Open the breaker for 30 seconds, then touch a control within 3 minutes.
A dark gas burner starts with the cap seating. For constant sparking or any gas smell, turn the knobs off and book a visit.
E9000, E9010, E9011 or U400 appears.
An overheat code returns after the cooktop cooled.
E8206 shows, or a gas burner stays dark.
Arrange a diagnosticYour technician reviews the issue with you and settles the cost before any repair starts. For built-in units the final figure comes after an on-site look.
Repairs under Thermador's manufacturer warranty belong with Thermador. For the work we carry out, we provide our own workmanship warranty.
A cooking zone ran for a long time without input, so the automatic time limit stepped in. Touch any control and set the zone again.
Thermador says the extended Flex Zone does not switch on. You can keep cooking on the other zones; note the code and book a visit.
Yes: E8204 for a nearly drained battery, E8205 for a lost connection and E8206 for a defective sensor.
If your cooktop is still inside the manufacturer's warranty, that coverage stays with the manufacturer. Once it has ended, we are glad to visit.
Thermador messages, symptoms, parts, repair visits
A bare "D" or "E" on a Thermador electric cooktop display marks an operating problem without a number. Switch the cooktop off and on again; if it was a one-off, the message goes away.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.