What it means
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
Thermador cooktop E8204 / Cooking sensor
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
Also appears as E8204
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
The wireless cooking sensor is the probe used with the induction cooktop.
E8204 stays after a new battery.
Your Thermador steps, stored on this device only

The wireless cooking sensor is the probe used with the induction cooktop.

The Thermador manual names a 3V CR2032 battery.

Review the manual to learn how to replace it.

Use the sensor and check that E8204 no longer appears.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature.
Read the definitionOnly the sensor's battery is low. The cooktop and the cooking zones are not mentioned.
Read the supporting manualE8204 is a nearly empty battery, E8205 a lost connection to the sensor, and E8206 a faulty sensor. Each has its own step.
Read the supporting manualThe Thermador manual tells owners to do it and refers to the manual for the method.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E8204"
Source: the error-code page for Thermador induction cooktops, entry E8204.
Use a 3V CR2032 battery in the wireless cooking sensor. Your owner's manual describes how to replace it.
In the owner's manual; the Thermador manual links to it.
Book a visit and say which sensor you use.
The Thermador sources do not say that E8204 stops the cooktop. They only describe the almost drained sensor battery.
Thermador messages, symptoms, parts, repair visits
E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.