What it means
E8206 means Thermador's page calls the wireless cooking sensor faulty. Unlike the battery and connection messages next to it, it offers no owner step. Note the display and book a visit.
Thermador cooktop E8206 / Cooking sensor
E8206 means Thermador's page calls the wireless cooking sensor faulty. Unlike the battery and connection messages next to it, it offers no owner step. Note the display and book a visit.
Also appears as E8206
E8206 means Thermador's page calls the wireless cooking sensor faulty. Unlike the battery and connection messages next to it, it offers no owner step. Note the display and book a visit.
E8204 is the battery message.
E8206 appears.
Your Thermador steps, stored on this device only

E8204 is the battery message. If you see E8206, the Thermador manual treats the sensor itself as the problem.

Stop using it for now.

Do not rely on its readings while the message is shown.

A technician can confirm whether the sensor needs replacement.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature.
Read the definitionThat it is defective. The Thermador manual offers no home remedy.
Read the supporting manualThe battery has its own message, E8204. E8206 is listed separately.
Read the supporting manualThe entry mentions only the sensor.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E8206"
Source: the error-code page for Thermador induction cooktops, entry E8206. It prints no owner step.
Thermador's support listing gives no owner step for E8206, so there is nothing to fix yourself. Note the display and book a visit.
It does no harm, but the Thermador manual does not recommend it for this message.
The model of the cooktop and when E8206 appears.
The sources we have do not say whether a replacement sensor is available. Ask the technician when you book.
Thermador messages, symptoms, parts, repair visits
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.