Inside the appliance
Cooktop control panel (touch keys and touchscreen). In plain English.
The control panel on a Thermador Freedom induction cooktop has touch keys and a touchscreen. The guide says a damp panel or an object on it can make the display stop responding or sound a signal tone. Dry the panel and remove objects; never leave hot cookware near it, which is what F5 warns about.

Where it fits.
Cooktop control panel (touch keys and touchscreen) in the appliance
On the cooktop surface; the guide's 5.2 Control panel section shows it.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Cooktop control panel (touch keys and touchscreen) concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.

Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.

Thermador gas igniter keeps clicking
Thermador's page lists four causes for sparking that will not stop or starts with the cooktop off: knobs left in the lighting or spark position, a draft working on the re-ignition feature, water on the surface, or a knob held down past the child lock position. Dismantling a gas appliance is a job for a trained technician.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Dry the panel
If the touchscreen does not respond or has frozen, the guide says the panel may be damp or something is on it. Dry it or remove the object.
- 2
Clear objects and hot pans
For a signal tone, remove objects from the panel and touchscreen and do not place hot cookware on it.
- 3
Wipe liquids off
A warning message with a tone: remove liquid or food from the panel.
- 4
Use the pause function to clean
Pause interrupts cooking so you can clean the panel without changing settings.
- 5
Know the panel lock
Touch and hold the lock key for about 4 seconds to lock or unlock the panel.
Cleaning or replacement?
Leave internal testing to a technician.
The display stays frozen after the panel is dry and clear.
The cooktop responds unusually after a power reset.
Spills got under or around the panel.
Arrange a diagnosticSources and model boundaries.
These documents back up the Cooktop control panel (touch keys and touchscreen) guidance. Choose the manual written for your model.
- Use and care guide, Freedom Induction cooktop CIT36YWB CIT36YWBB (en-us)
- Error Codes | Induction Cooktops Support | Thermador
Match your model to the guide it shipped with. See how we research these pages.
What is on the control panel?
Touch keys and a touchscreen, which the guide says you use to set functions and read information.
Why is my touchscreen not responding?
The guide says the panel is damp or something is on it. Dry it or remove the object.
What does F5 mean?
There is hot cookware near the control panel and the electronics are at risk. Remove it from the panel.
How do I lock the panel?
Touch and hold the lock key for about 4 seconds while the cooktop is on. The panel then shows it is locked.
Is it safe to cook with spills on the panel?
No. The guide says never to use the cooktop if liquid or food spilled around the panel. Turn it off and dry the panel.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
F5 and signal tone
F5 with a tone and no flashing means hot cookware near the control panel already made the cooking zone switch off to protect the electronics. Remove the cookware, wait a few seconds, then touch any control.
Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Cooktop repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.
