What it means
F5 with a tone and no flashing means hot cookware near the control panel already made the cooking zone switch off to protect the electronics. Remove the cookware, wait a few seconds, then touch any control.
Thermador cooktop F5 and signal tone / Overheating
F5 with a tone and no flashing means hot cookware near the control panel already made the cooking zone switch off to protect the electronics. Remove the cookware, wait a few seconds, then touch any control.
Also appears as F5 and signal tone
F5 with a tone and no flashing means hot cookware near the control panel already made the cooking zone switch off to protect the electronics. Remove the cookware, wait a few seconds, then touch any control.
Take the cookware away from the control panel.
F5 and the tone return with nothing near the controls.
Your Thermador steps, stored on this device only

Take the cookware away from the control panel.

The Thermador manual asks for a short pause.

Touch any control element.

Continue after the message goes and the electronics have cooled.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The control panel on a Thermador Freedom induction cooktop has touch keys and a touchscreen.
Read the definition
Component reference
The electronics of a Thermador cooktop or range cooktop run the zones and protect themselves from overheating.
Read the definitionThe electronics were protected from heat by the hot cookware beside the panel.
Read the supporting manualRemove the cookware, wait a few seconds, touch a control, then continue once clear.
Read the supporting manualYes; both support pages list it.
Read the supporting manualThe Freedom guide warns that hot cookware can make the electronics overheat, and says never to set hot pans and pots down on the control panel or the cooktop frame.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F5 and a signal tone"
Manufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F5 and a signal tone"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 25.09.2026; file tag _H (no printed edition date read) / PDF p9, p32
Sources: the induction and electric cooktop error-code pages from Thermador, entry F5 and a signal tone. The Freedom induction cooktop guide has the hot-cookware warning and the separate signal-tone row.
The Thermador manual gives no number. Wait a short while after taking the cookware away, then touch any control.
The tone belongs to the protection shutdown. Hot cookware near the control panel made the zone switch off to protect the electronics, so the tone is part of that message.
Book a visit if F5 and the tone return with nothing near the controls. First clear the panel and give the electronics time to cool.
The one with the flashing power level, which only warns. This entry, with a tone and no flashing, has already switched a zone off.
The Freedom guide has a separate row for a signal tone caused by an object on the touchscreen. Remove anything lying on the control panel and keep hot cookware off it; the guide gives no other step for that case.
Thermador messages, symptoms, parts, repair visits
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The electronics of a Thermador cooktop or range cooktop run the zones and protect themselves from overheating. F2 means the electronics overheated and one zone shut off; F4 shuts all zones; E7015, E8207 and E8208 are listed with them. Wait for the electronics to cool, then touch any control.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.