Inside the appliance
Induction cooking sensor. In plain English.
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.

Where it fits.
Induction cooking sensor in the appliance
It is a small wireless sensor used with suitable cookware. The guide says to select the cooking zone where you placed the cookware that carries the sensor.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Induction cooking sensor concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.

Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.

Thermador gas igniter keeps clicking
Thermador's page lists four causes for sparking that will not stop or starts with the cooktop off: knobs left in the lighting or spark position, a draft working on the re-ignition feature, water on the surface, or a knob held down past the child lock position. Dismantling a gas appliance is a job for a trained technician.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Read the code
E8204 is the battery, E8205 the lost connection, E8206 the sensor itself.
- 2
Swap the battery for E8204
Thermador says to replace the 3V CR2032 battery; the cooktop guide shows how.
- 3
Reset the function for E8205
Deactivate the cooking sensor function, then activate it again.
Cleaning or replacement?
Leave internal testing to a technician.
E8205 returns after you turn the function off and on.
E8206 shows; the page lists no owner step.
Arrange a diagnosticSources and model boundaries.
These documents back up the Induction cooking sensor guidance. Choose the manual written for your model.
- Error Codes | Induction Cooktops Support | Thermador
- Error Codes | Induction Cooktops Support | Thermador
- Error Codes | Induction Cooktops Support | Thermador
- Use and care guide, Freedom Induction cooktop CIT36YWB CIT36YWBB (en-us)
Match your model to the guide it shipped with. See how we research these pages.
Is the sensor magnetic?
Yes. The guide warns that it can affect electronic implants such as pacemakers and says to keep it at least 4 inches away.
How should I cook with it?
The guide says to keep a lid on the pot, use at least 1¼ inches of liquid, use suitable pots and keep the sensor's window clean.
Will a new battery fix E8206?
Thermador words E8206 as a defective sensor and lists no owner step, so a battery change does not apply.
When should I book?
When E8205 returns after a function reset, or when E8206 shows.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
E8204
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Cooktop repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.

