What it means
E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.
Thermador cooktop E8205 / Cooking sensor
E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.
Also appears as E8205
E8205 means the cooktop lost its connection to the wireless cooking sensor. Switch the cooking sensor function off, then on again.
Keep the sensor near the cooktop while you retry.
E8205 returns after reactivating.
Your Thermador steps, stored on this device only

Keep the sensor near the cooktop while you retry.

Turn the cooking sensor function off on the cooktop.

Turn it back on, as the Thermador manual says.

If it keeps dropping, a low battery is E8204, which has a separate step.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature.
Read the definitionThe cooktop no longer hears the sensor. The Thermador manual does not state the cause.
Read the supporting manualE8204 reports a nearly empty battery and E8206 a faulty sensor. E8205 sits in between: the link has dropped.
Read the supporting manualFor the lost link, the manual offers only the off-and-on step of the function. A repeat deserves a visit.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E8205"
Source: the error-code page for Thermador induction cooktops, entry E8205.
Not on this message. E8206 is the faulty sensor message.
The Thermador manual speaks of the sensor function, not the cooktop.
The Thermador manual says nothing about the zones, only about the sensor link.
Book a visit if the connection drops again straight after you switch the cooking sensor function off and on. A single drop that clears needs no visit.
Thermador messages, symptoms, parts, repair visits
E8204 means the battery in the wireless cooking sensor is almost drained. Replace it with a 3V CR2032 battery, as your owner's manual describes.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The wireless cooking sensor on a Thermador induction cooktop reads pan temperature. E8204 means its battery is nearly drained: replace the 3V CR2032. E8205 means the connection dropped: switch the sensor function off and on. E8206 calls the sensor defective.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.