Inside the appliance
Gas burner igniter. In plain English.
Thermador gas burners light with electronic igniters. The guides say they are fragile, spark when a burner is turned on, and should be cleaned with a damp cotton swab. Constant sparking has a short list of causes on the support page. Never take a gas appliance apart.

Where it fits.
Gas burner igniter in the appliance
Thermador's guides do not say where each igniter sits. They call the ceramic igniter fragile and say a damaged one may not light the burner.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Gas burner igniter concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.

Thermador gas burner won't light
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.

Thermador gas igniter keeps clicking
Thermador's page lists four causes for sparking that will not stop or starts with the cooktop off: knobs left in the lighting or spark position, a draft working on the re-ignition feature, water on the surface, or a knob held down past the child lock position. Dismantling a gas appliance is a job for a trained technician.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Check the knobs
Thermador's list for continuous sparking starts with knobs left in the LIGHTING or SPARK position: turn them to OFF.
- 2
Clean, never scrape
The guides say to clean a ceramic igniter with a cotton swab dampened with soapy water; sharp tools can damage it and it may stop lighting the burner.
- 3
Let it dry
A wet or dirty igniter sparks on and off. After a cleaning with water, the page says the sparking ends once the surface dries.
Cleaning or replacement?
Leave internal testing to a technician.
Sparking continues after the knobs are off and the surface is dry.
A burner stays dark, or you smell gas.
Arrange a diagnosticSources and model boundaries.
These documents back up the Gas burner igniter guidance. Choose the manual written for your model.
- Troubleshooting | Gas Cooktops & Rangetops Support | Thermador
- Troubleshooting | Gas Cooktops & Rangetops Support | Thermador
- Use and Care Guide, Professional Series Rangetops PCG305W PCG366W PCG364WD PCG486WD
- Use and Care Guide, Masterpiece Series Gas Cooktop SGS SGSX SGSP SGSXP
Match your model to the guide it shipped with. See how we research these pages.
Is sparking after a power cut normal?
Thermador says the igniters may spark once or twice when power is first connected or returns, provided no knob is stuck or pressed in.
Why do all igniters spark at once?
The cooktop guide says that on SGS and SGSP models all igniters spark when any one burner is turned on; SGSX and SGSXP spark one.
Can I light a burner during an outage?
The safety text says to turn the knob off, wait 5 minutes, then light a standard burner with a match. ExtraLow burners cannot be lit by hand.
Should I repair an igniter myself?
No. Thermador says never to dismantle a gas appliance unless you are qualified. Book a visit.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
Thermador range burner won’t light
On a Thermador Pro range, each rangetop burner has its own igniter and should catch within four seconds. If one will not, Thermador’s first suspect is a burner cap sitting out of alignment. Reseat it, dry everything, and check the knob. Several burners dead, or sparking that never stops, needs a technician.
Range repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.

