What it means
F4 on a Thermador electric cooktop means the electronics overheated and all cooking zones switched off. Wait for the electronics to cool, then touch any control.
Thermador cooktop F4 / Overheating
F4 on a Thermador electric cooktop means the electronics overheated and all cooking zones switched off. Wait for the electronics to cool, then touch any control.
Also appears as F4
F4 on a Thermador electric cooktop means the electronics overheated and all cooking zones switched off. Wait for the electronics to cool, then touch any control.
All zones are off, so pans will cool.
F4 returns after cooling.
Your Thermador steps, stored on this device only

All zones are off, so pans will cool. Do not leave food unattended.

Wait until the electronics have cooled down sufficiently.

Touch any control element.

Continue once the error message disappears.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The electronics of a Thermador cooktop or range cooktop run the zones and protect themselves from overheating.
Read the definitionFor F4, Thermador says the electronics overheated and switched off all cooking zones.
Read the supporting manualF2 shuts the corresponding zone only.
Read the supporting manualNot on the first occurrence; the Thermador manual gives only the cool-down steps.
Read the supporting manualNo manual for Thermador electric cooktops is cached for this site, so this comes from the Freedom induction guide, which carries identical wording. Its row for all cooking zones switching off automatically names one cause, overheated electronics, with the same three steps.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F4"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 25.09.2026; file tag _H (no printed edition date read) / PDF p9, p32
Source: the error-code page for Thermador electric cooktops, entry F4. No electric cooktop manual is cached; the Freedom induction cooktop guide uses the same wording.
Wait for cooling first. All cooking zones are off after F4, and the Thermador manual asks you to wait until the electronics have cooled down sufficiently before touching a control.
No. F4 is on the cooktop page and concerns the cooktop's electronics. Nothing printed there links it to an oven.
Book a visit if F4 happens every time. The Thermador manual gives only the cool-down steps for a first occurrence, and no further remedy.
The electronics. Thermador says F4 means the electronics overheated and switched off all cooking zones, not a single zone.
No. It repeats the three steps: wait until the electronics have cooled, touch any control element, and continue once the message disappears. It adds a general warning not to put hot pans on the control panel or frame.
Thermador messages, symptoms, parts, repair visits
F2 on a Thermador electric cooktop means the electronics overheated and the related cooking zone was switched off. Wait until the electronics cool, then touch any control.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
The electronics of a Thermador cooktop or range cooktop run the zones and protect themselves from overheating. F2 means the electronics overheated and one zone shut off; F4 shuts all zones; E7015, E8207 and E8208 are listed with them. Wait for the electronics to cool, then touch any control.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.