What it means
F8 with H or h means a cooking zone ran for a long time without any input and the automatic time limit switched it off. Tap any control, then set the zone again.
Thermador cooktop F8 + H/h / Modes and limits
F8 with H or h means a cooking zone ran for a long time without any input and the automatic time limit switched it off. Tap any control, then set the zone again.
Also appears as F8 + H/h
F8 with H or h means a cooking zone ran for a long time without any input and the automatic time limit switched it off. Tap any control, then set the zone again.
Think about how long the zone ran without being touched.
F8 appears without a long cooking time.
Your Thermador steps, stored on this device only

Think about how long the zone ran without being touched.

Tap one of the cooktop's controls.

You can set the zone and carry on.

If it appears after short cooking, book a visit.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
An automatic limit that triggers when a zone operates continuously without interaction.
Read the supporting manualNo; it is a time limit.
Read the supporting manualThey stopped because the limit triggered; touching a control restores control.
Read the supporting manualThe Pro Harmony induction range guide has a table headed "Time to F8 in hours" that depends on the power level. A zone left at level 1 may run up to 10 hours without interaction, at level 3 up to 5 hours, and at level 9 only 1 hour.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F8 + H/h and cooking zones not heating"
Manufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F8 + H/h and cooking zones not heating"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p22, p53
Sources: the induction and electric cooktop error-code pages from Thermador, entry F8 + H/h. The Pro Harmony induction range guide prints the time-to-F8 table.
The support page gives no time. The Pro Harmony induction range guide has its own table, from 1 hour at level 9 to 10 hours at level 1, but treat those figures as that range's own.
The Thermador manual treats H and h together, so both mean the same time-limit shutoff. The case does not change the steps: touch a control, then set the zone again.
No. F8 is the automatic time limit, not a breakdown. It switched the zone off because the zone ran a long time without input, and touching a control restores control.
Yes, both the electric and the induction cooktop pages list it, and the steps are the same: touch a control, then set the zone again.
In the Pro Harmony range guide, yes. Its table allows 10 hours at power level 1 and 1 hour at level 9. A different model may use different times, so check your own manual.
Thermador messages, symptoms, parts, repair visits
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.