What it means
E9011 means a Thermador cooktop is not connected properly. Disconnect it from power and compare the connection with the circuit diagram.
Thermador cooktop E9011 / Power supply
E9011 means a Thermador cooktop is not connected properly. Disconnect it from power and compare the connection with the circuit diagram.
Also appears as E9011
E9011 means a Thermador cooktop is not connected properly. Disconnect it from power and compare the connection with the circuit diagram.
Disconnect power first.
E9011 appears.
Your Thermador steps, stored on this device only

Disconnect the cooktop from the power supply.

The circuit diagram is in the installation materials.

Leave this to a qualified person if you are not trained.

We can inspect the connection.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The installation, not the supply voltage.
Read the supporting manualA qualified installer or electrician; wiring is not a DIY task.
Read the supporting manualE9000 is about voltage range; E9011 is about how the cooktop is wired.
Read the supporting manualThe Freedom induction cooktop guide puts the circuit-diagram wording in its row for a cooktop that does not turn on, next to two other causes: the power supply has been disconnected, and an electronics problem.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E9011"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 25.09.2026; file tag _H (no printed edition date read) / PDF p32
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p52
Source: the Thermador induction cooktop error-code page, entry E9011. The Freedom induction cooktop guide (CIT36YWB) and the Pro Harmony induction range guide print the matching troubleshooting row.
The Thermador manual only says the connection does not match the circuit diagram; it names no cause.
Not before the connection is checked. E9011 says the cooktop is not connected properly, so disconnect it from power and have the wiring compared with the circuit diagram first.
Yes, in the installation instructions that came with the cooktop. Compare the wiring with it only if you are trained, and otherwise leave it to a qualified person.
Book a visit whenever E9011 shows, because it points to the connection rather than the supply voltage. Disconnect the cooktop from power first.
No. The Freedom guide lists a disconnected supply and an electronics problem in the same row. Checking whether the kitchen lighting and other appliances still have power rules out the simplest cause before anyone opens the wiring.
Thermador messages, symptoms, parts, repair visits
E9000 means the supply voltage reaching a Thermador cooktop is outside its normal range. The Thermador manual names no owner step; have the supply checked by an electrician and book a visit.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.