What it means
F6 means a cooking zone overheated and shut itself off to protect the work surface, in the same wording Thermador uses for F1. Wait for the electronics to cool, then switch the zone back on.
Thermador cooktop F6 / Overheating
F6 means a cooking zone overheated and shut itself off to protect the work surface, in the same wording Thermador uses for F1. Wait for the electronics to cool, then switch the zone back on.
Also appears as F6
F6 means a cooking zone overheated and shut itself off to protect the work surface, in the same wording Thermador uses for F1. Wait for the electronics to cool, then switch the zone back on.
Take the pan off the shut-off zone.
F6 returns after cooling.
Your Thermador steps, stored on this device only

Take the pan off the shut-off zone.

Wait until the electronics have cooled down sufficiently.

Turn the zone back on.

If F6 returns, record the zone.
Give us your model number and the checks you already made, then start your request below.
Book a visit

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
Not in the Thermador manual: both share one entry and one remedy.
Read the supporting manualThe work surface, per Thermador.
Read the supporting manualThe manual does not suggest so.
Read the supporting manualThe Pro Harmony induction range guide prints the row for a cooking zone that has overheated and switched off to protect the work surface. It gives two steps: wait until the electronics have cooled down sufficiently, then switch the cooking zone back on. After that you can continue to cook.
Read the supporting manualIn its list of ways to avoid damage, the guide says overheating can damage the cookware and tells owners not to heat empty pots or pans. It also says hot cookware can make the electronics overheat, so hot pans should never be set down on the control panel or the cooktop frame.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F1 or F6"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p10, p53
Source: the Thermador induction cooktop error-code page, entry F1 or F6. The Pro Harmony induction range guide prints the matching troubleshooting row and the cookware cautions.
A cooking zone overheated and shut itself off to protect the work surface. It is the same wording Thermador uses for F1.
No. F6 points to the zone overheating; F2 and F4 are the codes that cover overheated electronics, so check which letters you see.
Yes, after cooling and switching the zone on. Wait until the electronics have cooled down sufficiently, turn the zone back on, and you can continue cooking.
Book a visit if F6 repeats on a cool surface, or keeps returning after the electronics have cooled and the zone is switched back on.
The guide gives only the wait and switch-on steps and no further remedy. If the zone keeps switching off after the electronics have cooled, book a technician instead of testing it repeatedly.
Thermador messages, symptoms, parts, repair visits
F1 on a Thermador induction cooktop means a cooking zone overheated and switched itself off to protect the work surface. Give the electronics time to cool down before you turn the zone back on.
When one Thermador burner will not light while the rest do, the support page points to the burner cap: it is out of alignment, and its tabs must sit in the notches on the burner base. The cooktop guide adds a 4-second rule and clean, dry igniter ports. Gas odor means shut the unit off and book a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.