The care journal

Thermador error codes explained upkeep notes for ranges, ovens and the rest of the kitchen.

What the message on your panel is saying, how similar messages differ and what to try first.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Before following the steps.

Two hands wipe the door seal and steel rim of an open dishwasher with a white cloth in a navy kitchen.

Copy the code exactly

Count the digits, and note any hyphen or colon. E14, E3000, E:61-02 and E61-02 are different spellings, not different problems.

Read the full sequence

A message on the panel changes where you begin.

E14Check, then book

Water and power supply

E14 means the flow meter has failed or water is not entering the dishwasher through the filling system. The Thermador manual gives no owner step; note the display and book a visit.

E3000Shut off water, book

Water and power supply

E3000 reports a flow meter failure or an issue with water flowing into the dishwasher or the filling system. No owner step is printed; note the display and book a visit.

E3200Check, then book

Water and power supply

E3200 reports an issue with water flowing into the dishwasher: the level is too low or water is not pumped correctly. Check the inlet hose, confirm the supply is on (10 l/min), then see the DWHD660EFM guide.

E6101Check, then book

Drain pump

E6101 says the drain pump is blocked, clogged or faulty, with no owner step printed. Look for standing water in the tub and book a visit.

E27Check supply

Water and power supply

E27 means the supply voltage is too low. Thermador adds that this is not a failure of the dishwasher itself; have your home's voltage and electrical system checked by a professional electrician.

E9001Check supply

Water and power supply

E9001 means the house power supply to the dishwasher is too low. Reset the breaker for 30 seconds; if E9001 comes back, have an electrician check the incoming voltage. The guide says E:90-01 is no problem with the appliance.

E0105Book a visit

Control board and sensors

E0105 is the four-digit form of a self-test result: the dishwasher found a problem in its heater electronics. The Thermador manual prints no owner step. Note the display and the model, then book a visit.

E04Book a visit

Control board and sensors

E04 is the short form of the heater electronics self-test message on a Thermador dishwasher. The Thermador manual prints no owner step; note the display and model and book a visit.

What we do. Where we stop.

Diagnostics and repair

Our technicians look the appliance over before they propose any work. When a part is needed, an OEM part for your model is ordered in.

Manufacturer-covered repairs

Repairs under Thermador's manufacturer warranty belong with Thermador. For the work we carry out, we provide our own workmanship warranty.

Here to help

Good questions.
Clear answers.

Talk to our team
Why read a guide when code pages exist?

A guide explains how a family of messages fits together, such as the E-numbers on a dishwasher display.

Do guides add meanings the pages lack?

No. They organize what Thermador printed, and say where it stops.

Which codes are covered?

Mostly dishwasher, cooktop and coffee system entries, which have the longest lists.

What if the guide says not explained?

Then the documents are silent. Send us the display photo and we look during the visit.

Let’s take care of it.

One burner, two burners,
or the whole range.