Thermador dishwasher E0105 / Control board and sensors

Thermador dishwasher
code E0105

Dishwasher / display reference

E0105 is the four-digit form of a self-test result: the dishwasher found a problem in its heater electronics. The Thermador manual prints no owner step. Note the display and the model, then book a visit.

Also appears as E0105

Last reviewed

Dishwasher / display reference
Meaning
E0105 is the four-digit form of a self-test result: the dishwasher found a problem in its heater electronics. The Thermador manual prints no owner step. Note the display and the model, then book a visit.
Who handles it
Book a visit
Related codes
Source
Error Codes | Dishwashers Support | Thermador

What Thermador dishwasher E0105 means.

What it means

E0105 is the four-digit form of a self-test result: the dishwasher found a problem in its heater electronics. The Thermador manual prints no owner step. Note the display and the model, then book a visit.

What you can safely check

Copy the code exactly.

When to call a technician

E0105 appears again.

Your Thermador steps, stored on this device only

Safe checks, in order.

0 of 4 checks done
  1. Thermador dishwasher E0105: Dishwasher with the toe-kick panel off, exposing a control board in a white housing, and its three-prong power plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Write the display down

    Copy the code exactly.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Find the model number

    It is on the data plate.

  3. A built-in refrigerator panel flush with cabinetry
    Illustration. Follow your model’s instructions.
    Check 3

    Do not reset repeatedly

    The Thermador manual lists no reset for this message.

  4. A technician in a navy shirt holds a tablet showing five empty checkboxes beside a built-in wall oven in a navy kitchen.
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    The heater electronics are a technician matter.

Is E0105 still on the display?

Give us your model number and the checks you already made, then start your request below.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 3Motor wiring
  3. 4Heater wiring

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

A little more context.

What does the self-test check?

The Thermador manual says the appliance detected faulty heater electronics. It does not describe the test.

Read the supporting manual

How does E0105 differ from E2030?

E2030 reports the heat pump internal heater and has a breaker reset. E0105 has none.

Read the supporting manual

The manual behind the message.

Manufacturer document

Error Codes | Dishwashers Support | Thermador

Thermador / BSH Home Appliances (thermador.com/us support page)

Undated web page; fetched 12.11.2026 / entry "E0105"

Source: the dishwasher error-code page from Thermador, entry E0105.

Here to help

Good questions.
Clear answers.

Talk to our team
Will the dishwasher still wash?

The source does not say. It reports a problem in the heater electronics found by the self-test, with no usage advice, so note the display and model and book a visit.

Is a breaker reset worth trying?

The Thermador manual lists none. It prints no reset for E0105, unlike E2030, so go straight to noting the display and the model.

Is the heater the part?

The Thermador manual speaks of heater electronics, not of the heater itself, so it does not say which part is affected.

What do I tell you?

The code, the model and what the dishwasher did when E0105 appeared. The model number is on the data plate.

Let’s take care of it.

One burner, two burners,
or the whole range.