Thermador dishwasher E04 / Control board and sensors

Thermador dishwasher
code E04

Dishwasher / display reference

E04 is the short form of the heater electronics self-test message on a Thermador dishwasher. The Thermador manual prints no owner step; note the display and model and book a visit.

Also appears as E04

Last reviewed

Dishwasher / display reference
Meaning
E04 is the short form of the heater electronics self-test message on a Thermador dishwasher. The Thermador manual prints no owner step; note the display and model and book a visit.
Who handles it
Book a visit
Related codes
Source
Error Codes | Dishwashers Support | Thermador

What Thermador dishwasher E04 means.

What it means

E04 is the short form of the heater electronics self-test message on a Thermador dishwasher. The Thermador manual prints no owner step; note the display and model and book a visit.

What you can safely check

Write E04 as shown.

When to call a technician

E04 shows again after the dishwasher has been idle.

Your Thermador steps, stored on this device only

Safe checks, in order.

0 of 4 checks done
  1. Thermador dishwasher E04: Dishwasher with the toe-kick panel off, exposing a control board in a white housing, and its three-prong power plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Record the display

    Write E04 as shown.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Locate the model number

    On the data plate.

  3. A built-in refrigerator panel flush with cabinetry
    Illustration. Follow your model’s instructions.
    Check 3

    Do not force cycles

    Repeated starts will not change a self-test result.

  4. A technician in a navy shirt holds a tablet showing five empty checkboxes beside a built-in wall oven in a navy kitchen.
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    The heater electronics are for a technician.

Is E04 still on the display?

Give us your model number and the checks you already made, then start your request below.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 3Motor wiring
  3. 4Heater wiring

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

A little more context.

Is E04 the limescale message?

No. On this page limescale is a separate entry, E2060, and it has an owner step: descale the dishwasher with a descaler, and use softening salt if the dishwasher has a water softener. E04 reports faulty heater electronics in the self-test and has no owner step.

Read the supporting manual

The manual behind the message.

Manufacturer document

Error Codes | Dishwashers Support | Thermador

Thermador / BSH Home Appliances (thermador.com/us support page)

Undated web page; fetched 12.11.2026 / entry "E04"

Manufacturer document

Use and care guide, Dishwasher DWHD660EFM (en-us)

BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)

PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33

Source: the dishwasher error-code page from Thermador, entry E04. The DWHD660EFM guide is cited for its limescale message E:20-60, which is a different entry.

Here to help

Good questions.
Clear answers.

Talk to our team
Does E04 mean the heater burned out?

The Thermador manual says electronics. E04 reports a problem with the heater electronics in the dishwasher's self-test and does not say the heater burned out.

Is there a reset?

None is listed. The checks warn that repeated starts will not change a self-test result, so note the display and model and book a visit.

Can I still wash?

Not stated. The Thermador manual prints no owner step and no usage advice for E04, so do not force repeated cycles; book a visit instead.

What do I report?

The display as shown, the model number from the data plate, and what the dishwasher did when the code appeared.

How is E04 different from E2030?

E2030 is a heat pump internal heater error with a 30-second breaker reset on the Thermador manual. E04 is the heater electronics self-test message with no reset step, so go straight to booking a visit.

Let’s take care of it.

One burner, two burners,
or the whole range.