Inside the appliance
Dishwasher filter system. In plain English.
The filter system catches food particles before they reach the pump. Thermador lists a blocked filter first under E22 and E9240, and says to rinse it under running water with mild soap and a soft brush. The DWHD660EFM guide says to check it after every cycle.

Where it fits.
Dishwasher filter system in the appliance
The guide's overview page marks the filter system in the tub, and its transport steps lift it out ahead of the pump cover. The cleaning how-to is a QR code, so we do not describe it.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Dishwasher filter system concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Look after each cycle
The DWHD660EFM guide asks you to check the filters for residue after every dishwashing cycle.
- 2
Wash it by hand
Thermador's E22 and E9240 entries: wash the filter under running water with mild soap and a soft brush, then reinstall it.
- 3
Seat it and twist
Among the causes the guide gives for food left on dishes: filters inserted wrongly. Insert them properly and twist them into place.
Cleaning or replacement?
Leave internal testing to a technician.
E22 or E9240 returns after the filter is clean and seated.
Dishes stay gritty although the filter is clean and twisted into place.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher filter system guidance. Choose the manual written for your model.
- Error Codes | Dishwashers Support | Thermador
- Error Codes | Dishwashers Support | Thermador
- Use and care guide, Dishwasher DWHD660EFM (en-us)
Match your model to the guide it shipped with. See how we research these pages.
Which codes point to the filter?
E22 and E9240. Both start a list of causes with a blocked dishwasher filter, ahead of the drain pump and hoses.
How do I clean it?
Thermador's entries say to remove it, wash it under running water with mild soap and a soft brush, and reinstall it.
How often should I check it?
The DWHD660EFM guide says to check the filters for residue after every dishwashing cycle.
What if the code returns?
Follow the rest of the same entry: the cover over the pump, the hose and the air gap. If the code persists, arrange a visit.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
E22
E22 has several possible causes on Thermador's page: a blocked filter, a blocked drain pump or loose pump cover, a kinked pump hose, or a clogged air gap or drain hose. Start with the filter, then work down the list.
Thermador dishwasher not draining
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Dishwasher repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.

