What it means
E9240 comes with a checklist: a blocked filter, a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide for E:92-40 says filters are soiled or blocked: clean them.
Thermador dishwasher E9240 / Drain pump
E9240 comes with a checklist: a blocked filter, a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide for E:92-40 says filters are soiled or blocked: clean them.
Also appears as E9240
E9240 comes with a checklist: a blocked filter, a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide for E:92-40 says filters are soiled or blocked: clean them.
Wash it under running water with mild soap and a soft brush, then reinstall.
E9240 returns after cleaning.
Your Thermador steps, stored on this device only

Wash it under running water with mild soap and a soft brush, then reinstall.

Remove the cover, clear debris and click it back on.

Check for bends or kinks.

Clear debris, reconnect and run a rinse cycle.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The drain pump sends used wash water out of a Thermador dishwasher.
Read the definition
Component reference
The filter system catches food particles before they reach the pump.
Read the definitionFilters are soiled or blocked; clean them.
Read the supporting manualThe pump and cover, the pump hose, and the air gap with the drain hose.
Read the supporting manualThe checklists are close; the guide ties E9240 to the filters first.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E9240 / E92-40"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Sources: the Thermador dishwasher error-code page and the DWHD660EFM guide, pp. 33 to 35 (E:92-40).
Thermador says to clean the filter regularly but gives no interval. Wash it under running water with mild soap and a soft brush whenever E9240 shows, then reinstall it.
Yes, the DWHD660EFM guide prints the same code as E:92-40 and says the filters are soiled or blocked, so cleaning them comes first.
No, only a soft brush and a bucket. Wash the filter under running water with mild soap, then reinstall it.
Book a visit if E9240 returns after cleaning the filter, pump cover, pump hose, air gap and drain hose, or if water is left in the tub.
Thermador messages, symptoms, parts, repair visits
E22 has several possible causes on Thermador's page: a blocked filter, a blocked drain pump or loose pump cover, a kinked pump hose, or a clogged air gap or drain hose. Start with the filter, then work down the list.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The drain pump sends used wash water out of a Thermador dishwasher. Thermador's pages tie it to E22, E23, E24, E25, E6101, E6102 and E6103. Owner steps: reseat the cover over the pump, straighten the drain hose and clear the air gap. A code that keeps returning means a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.