What it means
E6102 comes with a checklist: a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide adds that E:61-02 is not an appliance error: secure the pump cover or clean the pump.
Thermador dishwasher E6102 / Drain pump
E6102 comes with a checklist: a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide adds that E:61-02 is not an appliance error: secure the pump cover or clean the pump.
Also appears as E6102
E6102 comes with a checklist: a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide adds that E:61-02 is not an appliance error: secure the pump cover or clean the pump.
Remove it, clear debris and standing water, and click it back until it is fully closed.
E6102 returns after the checklist.
Your Thermador steps, stored on this device only

Remove it, clear debris and standing water, and click it back until it is fully closed.

The guide says an object blocking the pump can trigger E:61-02.

Make sure the pump hose is not bent or kinked.

Switch off, disconnect the hose into a bucket, clear it, reconnect and run a rinse cycle.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The drain pump sends used wash water out of a Thermador dishwasher.
Read the definitionThe guide says it is not an appliance error: the cover is loose or something blocks the pump.
Read the supporting manualTwo more causes, a kinked pump hose and a clogged air gap or drain hose.
Read the supporting manualThe guide reads E:61-03 as a garbage disposal plug or kinked hose problem. E6102 is about the pump cover.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E6102 / E61-02"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Sources: the Thermador dishwasher error-code page and the DWHD660EFM guide (pp. 33 to 35, E:61-02).
Yes, the Thermador manual prints E6102 and E61-02 together.
A bucket for the hose step; the cover opens by hand.
Remove the pump cover and put it back so it sits securely. The DWHD660EFM guide gives that as the first step for E:61-02.
Book a visit if E6102 persists after you have worked through the checks. The checks include the pump cover, hose and air gap.
Thermador messages, symptoms, parts, repair visits
E6103 carries the same checklist on Thermador's page. The DWHD660EFM guide narrows E:61-03 for a dishwasher that is not draining: remove the garbage disposal plug and make sure the drain hose is not kinked.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The drain pump sends used wash water out of a Thermador dishwasher. Thermador's pages tie it to E22, E23, E24, E25, E6101, E6102 and E6103. Owner steps: reseat the cover over the pump, straighten the drain hose and clear the air gap. A code that keeps returning means a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.