Inside the appliance
Dishwasher spray arms (upper and lower). In plain English.
The spray arms are the rotating arms that spray water onto the dishware in a Thermador dishwasher: a lower arm and an upper arm. The use and care guide says to clean them if dishes come out unwashed. E:92-10 names a blocked or badly fitted lower arm, and E6160 names the lower arm's reference position.

Where it fits.
Dishwasher spray arms (upper and lower) in the appliance
Inside the tub; the guide's parts overview shows the lower and upper spray arms.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Dishwasher spray arms (upper and lower) concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Spin each arm by hand
Thermador's support page says to spin each spray arm and confirm it rotates freely and is not blocked.
- 2
Rearrange the load
The guide says to arrange dishware so it does not obstruct the lower spray arm, and not to block either arm.
- 3
Check the lower arm is fitted
E:92-10 also lists a lower spray arm that is not correctly fitted. Refit it as the guide shows.
- 4
Clear the nozzles
Remove the arms and rinse them under water. Use a toothpick on debris in the holes, then reinstall.
- 5
Check the filter too
The support page lists a clogged filter beside the arms. Rinse it under lukewarm water.
Cleaning or replacement?
Leave internal testing to a technician.
E6160 or E:92-10 returns with the arms spinning freely and fitted correctly.
Dishes stay dirty after the arms and filter are clean.
The lower arm will not turn or sit in place.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher spray arms (upper and lower) guidance. Choose the manual written for your model.
- Use and care guide, Dishwasher DWHD660EFM (en-us)
- Appliance Features | Dishwashers Support | Thermador
- Error Codes | Dishwashers Support | Thermador
Match your model to the guide it shipped with. See how we research these pages.
What do the spray arms do?
They spray water onto the dishware. The guide describes a lower arm and an upper arm, and says to clean them if dishware is not washed properly.
What does E:92-10 mean?
Rotation of the lower spray arm is blocked, or the arm is not correctly fitted. Rearrange the dishware and refit the arm.
What does E6160 mean?
Thermador's support page says the Zone Control lower spray arm reference position was not found. The guide words E:61-60 differently.
How do I clean the spray arms?
Remove them, rinse under water and clear the holes with a toothpick, then reinstall. The guide also has a QR code video for the steps.
Why are my dishes not clean?
Thermador lists a blocked arm, clogged nozzles, a clogged filter, nested items or the wrong cycle. Check the arms and filter first.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
E9210
E9210 appears in the DWHD660EFM guide as E:92-10: spray arm rotation of the lower spray arm is blocked, or the arm is not fitted correctly. Rearrange the dishware and fit the arm properly.
Thermador dishwasher not draining
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Dishwasher repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.


