What it means
E24 has three listed causes on Thermador's page: a blocked drain pump or loose cover, a kinked pump hose, and a clogged air gap or drain hose. Open the pump cover first, then check the hose and air gap.
Thermador dishwasher E24 / Drain pump
E24 has three listed causes on Thermador's page: a blocked drain pump or loose cover, a kinked pump hose, and a clogged air gap or drain hose. Open the pump cover first, then check the hose and air gap.
Also appears as E24
E24 has three listed causes on Thermador's page: a blocked drain pump or loose cover, a kinked pump hose, and a clogged air gap or drain hose. Open the pump cover first, then check the hose and air gap.
Cut power at the breaker before anyone reaches into the base.
E24 returns after the cover, hose and air gap checks.
Your Thermador steps, stored on this device only

Remove the drain pump cover and take out standing water and loose debris.

Replace it so that it clicks into place; the Thermador manual says this closes it completely.

Look along the hose for a bend or kink and straighten it.

Switch the appliance off, check the air gap, put the drain hose in a bucket, clear it, reconnect and run a rinse cycle.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The drain pump sends used wash water out of a Thermador dishwasher.
Read the definitionThree possible causes in order: the drain pump and its cover, the pump hose, and the air gap with the drain hose.
Read the supporting manualOn Thermador's page they carry the same checklist, so the sources do not separate them.
Read the supporting manualE22 puts a blocked filter at the front of the list. E24 starts at the pump.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E24 / E-24"
Source: the Thermador dishwasher error-code page, entry E24 / E-24.
Start a rinse cycle after reconnecting the drain hose.
The Thermador manual says to turn the appliance off before checking the air gap.
Yes, the Thermador manual prints both spellings in one entry.
If the issue still exists after all three checks.
Thermador messages, symptoms, parts, repair visits
E25 shares its checklist with E24: a blocked drain pump or loose cover, a kinked pump hose, and a clogged air gap or drain hose. Work through them in that order and finish with a rinse cycle.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The drain pump sends used wash water out of a Thermador dishwasher. Thermador's pages tie it to E22, E23, E24, E25, E6101, E6102 and E6103. Owner steps: reseat the cover over the pump, straighten the drain hose and clear the air gap. A code that keeps returning means a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.