What it means
E22 has several possible causes on Thermador's page: a blocked filter, a blocked drain pump or loose pump cover, a kinked pump hose, or a clogged air gap or drain hose. Start with the filter, then work down the list.
Thermador dishwasher E22 / Drain pump
E22 has several possible causes on Thermador's page: a blocked filter, a blocked drain pump or loose pump cover, a kinked pump hose, or a clogged air gap or drain hose. Start with the filter, then work down the list.
Also appears as E22
E22 has several possible causes on Thermador's page: a blocked filter, a blocked drain pump or loose pump cover, a kinked pump hose, or a clogged air gap or drain hose. Start with the filter, then work down the list.
Cut power at the breaker before anyone reaches into the base.
E22 returns after cleaning the filter and checking the hose.
Your Thermador steps, stored on this device only

Remove it and wash it under running water with mild soap and a soft brush, then reinstall.

Remove the drain pump cover, take out standing water and loose debris, and click the cover back on.

Make sure it is not bent or kinked.

Turn the appliance off, check the air gap, put the drain hose in a bucket, clear debris, reconnect, and run a rinse cycle.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The filter system catches food particles before they reach the pump.
Read the definitionFour things in order: the filter, the drain pump and its cover, the pump hose, and the air gap with the drain hose.
Read the supporting manualThermador lists it first for this code, and it is also the simplest to remove and wash.
Read the supporting manualThe pump-and-hose checklist is the same, but E22 adds the blocked filter at the front.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E22 / E-22"
Source: the Thermador dishwasher error-code page, entry E22 / E-22.
Yes. Turn the appliance off for the pump and air gap steps, and keep towels for standing water.
Start a rinse cycle after reconnecting the drain hose, as the Thermador manual says.
Yes, the Thermador manual prints both spellings together as one entry.
When the issue still exists after all four checks.
Thermador messages, symptoms, parts, repair visits
E9240 comes with a checklist: a blocked filter, a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide for E:92-40 says filters are soiled or blocked: clean them.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The filter system catches food particles before they reach the pump. Thermador lists a blocked filter first under E22 and E9240, and says to rinse it under running water with mild soap and a soft brush. The DWHD660EFM guide says to check it after every cycle.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.