What it means
E6103 carries the same checklist on Thermador's page. The DWHD660EFM guide narrows E:61-03 for a dishwasher that is not draining: remove the garbage disposal plug and make sure the drain hose is not kinked.
Thermador dishwasher E6103 / Drain pump
E6103 carries the same checklist on Thermador's page. The DWHD660EFM guide narrows E:61-03 for a dishwasher that is not draining: remove the garbage disposal plug and make sure the drain hose is not kinked.
Also appears as E6103
E6103 carries the same checklist on Thermador's page. The DWHD660EFM guide narrows E:61-03 for a dishwasher that is not draining: remove the garbage disposal plug and make sure the drain hose is not kinked.
If the drain connects to a garbage disposal, the knock-out plug must be removed, per the guide.
E6103 returns after the checks.
Your Thermador steps, stored on this device only

If the drain connects to a garbage disposal, the knock-out plug must be removed, per the guide.

Look along it for a kink.

Remove the pump cover, clear debris and click it back on.

Check the air gap, clear the hose and run a rinse cycle.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The drain pump sends used wash water out of a Thermador dishwasher.
Read the definitionNot an appliance error: the garbage disposal is still plugged or the drain hose is kinked, and water is not draining.
Read the supporting manualThe pump cover, pump hose and air gap checks.
Read the supporting manualThe guide has a related line saying to keep a high loop in the drain hose and avoid debris flushing back.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E6103 / E61-03"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Sources: the Thermador dishwasher error-code page and the DWHD660EFM guide (pp. 33 to 35, E:61-03).
The guide lists it as the first cause. It does not explain the mechanism.
Yes, E:61-03 in the DWHD660EFM guide is the same message as E6103. The guide ties it to a dishwasher that is not draining.
The guide ties it to water not draining.
Book a visit if the checks, including the disposal plug and a kinked drain hose, do not clear E6103.
Thermador messages, symptoms, parts, repair visits
E6102 comes with a checklist: a blocked drain pump or loose cover, a kinked pump hose, a clogged air gap or drain hose. The DWHD660EFM guide adds that E:61-02 is not an appliance error: secure the pump cover or clean the pump.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The drain pump sends used wash water out of a Thermador dishwasher. Thermador's pages tie it to E22, E23, E24, E25, E6101, E6102 and E6103. Owner steps: reseat the cover over the pump, straighten the drain hose and clear the air gap. A code that keeps returning means a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.