What it means
E6101 says the drain pump is blocked, clogged or faulty, with no owner step printed. Look for standing water in the tub and book a visit.
Thermador dishwasher E6101 / Drain pump
E6101 says the drain pump is blocked, clogged or faulty, with no owner step printed. Look for standing water in the tub and book a visit.
Also appears as E6101
E6101 says the drain pump is blocked, clogged or faulty, with no owner step printed. Look for standing water in the tub and book a visit.
Standing water after a cycle confirms a drain problem.
Water is left in the tub.
Your Thermador steps, stored on this device only

Standing water after a cycle confirms a drain problem.

Does it fail every cycle or only some?

If your display shows E6102 or E6103, Thermador gives a pump-cover and hose checklist instead.

A technician tests the pump.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The drain pump sends used wash water out of a Thermador dishwasher.
Read the definitionThe code names the drain pump as blocked, clogged or faulty.
Read the supporting manualThose two come with checklists for the pump cover, hose and air gap. E6101 has none.
Read the supporting manualBoth name the drain pump in the same words, in two display styles.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E6101"
Source: the Thermador dishwasher error-code page, entry E6101.
The entry lists no steps; the related E6102 entry does but is a separate message.
Possibly, since E6101 points to a blocked drain pump. Check the tub for standing water after the cycle.
Not rated, but remove standing water before the next use.
The code and whether water was left behind.
Thermador messages, symptoms, parts, repair visits
E23 on Thermador's page says the drain pump is blocked, clogged or faulty, with no owner step printed. Look for standing water, note whether the tub drains at all, and book a visit.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The drain pump sends used wash water out of a Thermador dishwasher. Thermador's pages tie it to E22, E23, E24, E25, E6101, E6102 and E6103. Owner steps: reseat the cover over the pump, straighten the drain hose and clear the air gap. A code that keeps returning means a visit.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.