What it means
E14 means the flow meter has failed or water is not entering the dishwasher through the filling system. The Thermador manual gives no owner step; note the display and book a visit.
Thermador dishwasher E14 / Water and power supply
E14 means the flow meter has failed or water is not entering the dishwasher through the filling system. The Thermador manual gives no owner step; note the display and book a visit.
Also appears as E14
E14 means the flow meter has failed or water is not entering the dishwasher through the filling system. The Thermador manual gives no owner step; note the display and book a visit.
Make sure the water supply is open.
E14 repeats on the next cycle.
Your Thermador steps, stored on this device only

Make sure the water supply is open.

Look for a kink at the hose, as the neighboring E16 page advises.

Does water reach the tub?

A flow meter failure needs a technician.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The flow meter measures water entering a Thermador dishwasher.
Read the definitionThe flow meter has failed, or there is an issue with water flowing into the dishwasher or the filling system.
Read the supporting manualE16 and E17 point you at the inlet hose and filling system. E14 names the flow meter as well.
Read the supporting manualE3000 prints the same wording in the four-digit style.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E14"
Source: the dishwasher error-code page from Thermador, entry E14.
Possibly. The Thermador manual mentions an issue with water flowing into the dishwasher or the filling system, as well as a failed flow meter, so check whether water reaches the tub.
No owner step is listed. Check the tap and the inlet hose, and note the display; a flow meter failure needs a technician.
Check it anyway. The Thermador manual gives no hose step of its own, but the neighboring E16 page advises looking for a kink in the inlet hose, and it costs nothing.
Book a visit if water does not reach the tub, or if E14 repeats on the next cycle.
Thermador messages, symptoms, parts, repair visits
E3000 reports a flow meter failure or an issue with water flowing into the dishwasher or the filling system. No owner step is printed; note the display and book a visit.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The flow meter measures water entering a Thermador dishwasher. Thermador's E14 and E3000 entries describe a flow meter failure or a problem with the fill path and print no owner step. E16, E17, E18, E3200, E3300 and E3400 add inlet hose and supply checks.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.