Inside the appliance
Dishwasher flow meter. In plain English.
The flow meter measures water entering a Thermador dishwasher. Thermador's E14 and E3000 entries describe a flow meter failure or a problem with the fill path and print no owner step. E16, E17, E18, E3200, E3300 and E3400 add inlet hose and supply checks.

Where it fits.
Dishwasher flow meter in the appliance
Thermador's pages do not say where the flow meter sits, so we do not guess. It belongs to the fill path ahead of the tub.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Dishwasher flow meter concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Read the exact code
E14 and E3000 name the flow meter or the filling system; E16, E17, E3300 and E3400 speak of water that may not be able to enter.
- 2
Check the inlet hose
Thermador asks you to look at the inlet hose on E16, E17, E18, E3200, E3300 and E3400: it should not be kinked or damaged.
- 3
Confirm the supply is open
E18 and E3200 also ask whether the water supply is turned on; the page gives a flow rate of 10 l/min.
Cleaning or replacement?
Leave internal testing to a technician.
E14 or E3000 shows; the page lists no home step.
The inlet hose is clear and the supply is on, yet a fill code returns.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher flow meter guidance. Choose the manual written for your model.
- Error Codes | Dishwashers Support | Thermador
- Error Codes | Dishwashers Support | Thermador
- Use and care guide, Dishwasher DWHD660EFM (en-us)
Match your model to the guide it shipped with. See how we research these pages.
Do E14 and E3000 mean the same thing?
On the Thermador support page, yes: both say flow meter failure or a problem with water flowing in. The DWHD660EFM guide reads E:30-00 differently.
How does the DWHD660EFM guide read E3000?
As E:30-00, a water protection system that has activated. The guide says to close the water supply valve.
Is a kinked hose a flow meter problem?
Thermador files hose kinks under the fill codes E16, E17, E3300 and E3400, not under the flow meter entries.
When should I book?
When E14 or E3000 shows, or a fill code returns after the hose and supply checks.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
E14
E14 means the flow meter has failed or water is not entering the dishwasher through the filling system. The Thermador manual gives no owner step; note the display and book a visit.
Thermador dishwasher not draining
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Dishwasher repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.


