Model-specific code library

Thermador dishwasher Heat pump and Crystal Dry codes

9 printed codes in this group: E12, E2030, E2060, E2120, E2130, E6001, E6002, E6160, E9210.

Dishwasher with its side panel removed showing a heat pump, copper tubing and an open chamber of zeolite granules; the plug lies unplugged on the floor.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Heat pump and Crystal Dry codes

E12

E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.

Check, then book
E2030

E2030 means the heat pump internal heater has a problem. Switch the breaker off for 30 seconds and on; if E2030 returns, book a technician.

Reset once, then book
E2060

E2060 means limescale has built up in the heat pump, and the dishwasher needs descaling. Use a dishwasher descaler, and softening salt if your machine has a softener.

Check, then book
E2120

E2120 means the heater in the Zeolite (Crystal Dry) chamber has a problem. Switch the breaker off for 30 seconds and back on; if it persists, book a technician.

Reset once, then book
E2130

E2130 is read two ways. Thermador's support page says the Zeolite (Crystal Dry) fan motor is defective and gives a breaker reset; the DWHD660EFM guide says dishware is covering the Zeolite intake opening. Clear the intake, then reset the breaker.

Reset once, then book
E6001

E6001 describes a problem with the heat pump's internal heater, in the same words Thermador uses for E2030. Switch the dishwasher's breaker off for 30 seconds and back on; if it returns, book a technician.

Reset once, then book
E6002

E6002 means the heat pump is blocked, according to Thermador's page. Switch the breaker off for 30 seconds and on again; if E6002 returns, book a technician.

Reset once, then book
E6160

E6160 is read two ways. The support page says the Zone Control lower spray arm reference position was not found; the DWHD660EFM guide calls E:61-60 a technical error and sends you to service. Restart, then check the spray arm turns freely.

Check, then book
E9210

E9210 appears in the DWHD660EFM guide as E:92-10: spray arm rotation of the lower spray arm is blocked, or the arm is not fitted correctly. Rearrange the dishware and fit the arm properly.

Check, then book

Let’s take care of it.

One burner, two burners,
or the whole range.