What it means
E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.
Thermador dishwasher E12 / Heat pump and Crystal Dry
E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.
Also appears as E12
E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.
Use a dishwasher descaler as the Thermador manual says.
E12 returns right after descaling.
Your Thermador steps, stored on this device only

Use a dishwasher descaler as the Thermador manual says.

Follow the product instructions.

If the dishwasher has a water softener, refill softening salt.

E12 coming back soon after descaling needs a visit.
Give us your model number and the checks you already made, then start your request below.
Book a visit

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
A Thermador dishwasher heats its wash water through a heat pump.
Read the definitionThe heat pump has limescale built up in it. The Thermador manual names a descaler as the cure for hard-water deposits.
Read the supporting manualUse softener salt if your dishwasher has a softener, and review the owner's manual for loading it.
Read the supporting manualE2060 prints the same limescale message in the four-digit style.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E12"
Source: the dishwasher error-code page from Thermador, entry E12.
Any descaler made for dishwashers will do, according to Thermador. Follow the product's own instructions when you run it through the machine.
Regularly, but the Thermador manual does not specify an interval. Run the descaler whenever E12 appears, and review the owner's manual for loading and softener salt.
Only if your dishwasher has a water softener. In that case refill the softening salt, which the Thermador manual lists as a way to avoid a repeat.
Book a visit if E12 returns right after descaling, since the descaler has then had its chance and the Thermador manual lists no other owner step.
Thermador messages, symptoms, parts, repair visits
E2060 means limescale has built up in the heat pump, and the dishwasher needs descaling. Use a dishwasher descaler, and softening salt if your machine has a softener.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
A Thermador dishwasher heats its wash water through a heat pump. The support page names it in E12 and E2060 (limescale), E2030 and E6001 (internal heater) and E6002 (blocked). For limescale it says to run a descaler and use softener salt where the unit has a softener.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.