Inside the appliance
Dishwasher heat pump. In plain English.
A Thermador dishwasher heats its wash water through a heat pump. The support page names it in E12 and E2060 (limescale), E2030 and E6001 (internal heater) and E6002 (blocked). For limescale it says to run a descaler and use softener salt where the unit has a softener.

Where it fits.
Dishwasher heat pump in the appliance
The page gives no location. The heat pump belongs to the circuit that heats the wash water.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Dishwasher heat pump concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Note which code
Limescale (E12, E2060), internal heater (E2030, E6001), blocked pump (E6002) and a motor circuit on the control board (E0100) are separate entries.
- 2
Descale for E12 and E2060
Thermador says to use a dishwasher descaler on hard water deposits. The DWHD660EFM guide words E:20-60 as a calcified heating element.
- 3
Reset the breaker once
For E2030, E6001 and E6002 the page has you flip the dishwasher's breaker to off, count 30 seconds, and flip it back.
Cleaning or replacement?
Leave internal testing to a technician.
E2030, E6001, E6002 or E0100 returns after the breaker reset.
E12 or E2060 returns after descaling.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher heat pump guidance. Choose the manual written for your model.
- Error Codes | Dishwashers Support | Thermador
- Error Codes | Dishwashers Support | Thermador
- Error Codes | Dishwashers Support | Thermador
- Use and care guide, Dishwasher DWHD660EFM (en-us)
Match your model to the guide it shipped with. See how we research these pages.
What does E12 mean?
Thermador words it as limescale build-up in the heat pump, and names a descaler as the fix.
Why does water softener salt come up?
The page says salt helps avoid the build-up in future, for dishwashers that have a water softener.
Why can a cycle run long?
Thermador's troubleshooting page says cold incoming water makes the heat pump heat the water inside, which stretches the cycle.
When should I book a visit?
When an internal heater code or the blocked pump code returns after the 30-second breaker reset.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
E12
E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.
Thermador dishwasher not draining
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Dishwasher repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.

