What it means
E2060 means limescale has built up in the heat pump, and the dishwasher needs descaling. Use a dishwasher descaler, and softening salt if your machine has a softener.
Thermador dishwasher E2060 / Heat pump and Crystal Dry
E2060 means limescale has built up in the heat pump, and the dishwasher needs descaling. Use a dishwasher descaler, and softening salt if your machine has a softener.
Also appears as E2060
E2060 means limescale has built up in the heat pump, and the dishwasher needs descaling. Use a dishwasher descaler, and softening salt if your machine has a softener.
Use a product made for dishwashers.
E2060 returns after descaling.
Your Thermador steps, stored on this device only

Use a product made for dishwashers.

Follow its instructions.

If your dishwasher has a softener, use softening salt.

If E2060 returns.
Give us your model number and the checks you already made, then start your request below.
Book a visit

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
A Thermador dishwasher heats its wash water through a heat pump.
Read the definitionLimescale deposits have formed in the heat pump. Thermador adds that dishwashers run often, so limescale can build quickly, especially in hard water areas.
Read the supporting manualDescale regularly, and use softening salt if the dishwasher has a water softener function.
Read the supporting manualBoth name limescale in the heat pump. E12 is the shorter display style and E2060 the four-digit one.
Read the supporting manualThe DWHD660EFM use and care guide has a troubleshooting table on its pages 33 to 35.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E2060"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Sources: the Thermador dishwasher error-code page and the DWHD660EFM use and care guide, PDF pp. 33 to 35.
Regularly, according to the Thermador manual, which gives no interval. Thermador says dishwashers run often, so limescale can build quickly, especially in hard water areas.
Use softening salt if your dishwasher has a water softener function. The Thermador manual names it as a way to prevent a repeat, alongside regular descaling.
The Thermador manual does not say. It names limescale deposits in the heat pump as the cause and descaling as the remedy, and gives no damage warning.
Book a visit if E2060 returns after descaling. Descale with a dishwasher product first, and use softening salt if your machine has a softener.
Thermador messages, symptoms, parts, repair visits
E12 means limescale has built up in the heat pump. Run a dishwasher descaler through the machine to clear hard-water deposits, and use softener salt if your dishwasher has a softener.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
A Thermador dishwasher heats its wash water through a heat pump. The support page names it in E12 and E2060 (limescale), E2030 and E6001 (internal heater) and E6002 (blocked). For limescale it says to run a descaler and use softener salt where the unit has a softener.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.