Before work starts
Your technician reviews the issue with you and settles the cost before any repair starts. For built-in units the final figure comes after an on-site look.
Independent appliance repair
Book a visit for a Thermador MicroDrawer, built-in microwave or speed oven that shows E11, an E and a number, ERROR, LOCK ON or DEMO ON. Thermador's entries cover a keypad that fails from condensation and a fuse reset. Never open the cabinet yourself.


When a Thermador built-in microwave’s display works but the oven will not run, the guide asks you to confirm the door is shut with nothing caught in the seal, the door is undamaged and demo mode is off. A fully dead display points to the breaker, fuse or plug.

Sparks or arcing in a Thermador microwave come from metal in the cavity. Stop the oven and take out the metal. If you use aluminum foil, keep it to narrow strips an inch or more clear of the interior walls.
E11 on a Thermador microwave or speed oven means the touch buttons are not working properly, possibly from condensation on the keypad. Wipe the panel dry and switch the fuse off for 10 seconds.
ERROR on a Thermador MicroDrawer means the sensor could not detect vapor properly while cooking. Touch stop/clear and cook manually, checking the food temperature afterwards.
Part names come only after the technician has examined the microwave in person. The quote comes first; nothing is ordered unless you agree.

No illustrated glossary entry exists for this part yet. Follow the system named in the explanation and the manual cited for your model; a message by itself never means a part must be replaced.
Explore the researched partsWhat to expect.
Every step explained in advance.

Choose your appliance, whether range, oven or refrigeration, and tell us how it is behaving.

The technician inspects the unit, reviews the cause with you and agrees the cost before starting the work.

After the repair, the technician tests the appliance and explains the result, so you know what changed.
Write down the exact E number with the model. Thermador's page gives one step for it: cycle the fuse off and on.
E11 means the touch buttons are not responding; condensation on the panel is one named cause. Wipe it dry and switch the fuse off for 10 seconds.
LOCK ON locks the controls and the door mechanism: touch 5 and hold for 3 seconds. DEMO ON asks to hold START for 3 seconds.
ERROR on a sensor program means vapor was not picked up. Run the food on a timed setting instead.
An E number or E11 returns after the fuse reset.
The door will not open with LOCK ON cleared.
ERROR returns on timed settings.
Arrange a diagnosticYour technician reviews the issue with you and settles the cost before any repair starts. For built-in units the final figure comes after an on-site look.
Repairs under Thermador's manufacturer warranty belong with Thermador. For the work we carry out, we provide our own workmanship warranty.
The touch buttons are not responding as they should, and the page names condensation on the keypad. Dry the panel and switch the fuse off for 10 seconds.
After a power return the MicroDrawer flashes that prompt and forgets its settings. Press stop/clear and reset the clock.
Yes. Speed ovens share the E-and-a-number entry on Thermador's microwave page; give us the model number.
If your microwave is still inside the manufacturer's warranty, that coverage stays with the manufacturer. Once it has ended, we are glad to visit.
Thermador messages, symptoms, parts, repair visits
On a Thermador MicroDrawer microwave, DEMO ON? HOLD START 3 SEC is a prompt, not an error. Holding the start (+30 secs) key for 3 seconds switches demo mode on. Leave the key alone if you want to cook.
When a Thermador built-in microwave’s display works but the oven will not run, the guide asks you to confirm the door is shut with nothing caught in the seal, the door is undamaged and demo mode is off. A fully dead display points to the breaker, fuse or plug.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.