What it means
E3400 is read two ways. Thermador's support page groups it with E3300 as a filling problem where water may not enter; the DWHD660EFM guide shows E:34-00 as water running in continuously, and says to close the water supply valve.
Thermador dishwasher E3400 / Water and power supply
E3400 is read two ways. Thermador's support page groups it with E3300 as a filling problem where water may not enter; the DWHD660EFM guide shows E:34-00 as water running in continuously, and says to close the water supply valve.
Also appears as E3400
E3400 is read two ways. Thermador's support page groups it with E3300 as a filling problem where water may not enter; the DWHD660EFM guide shows E:34-00 as water running in continuously, and says to close the water supply valve.
If water keeps entering the dishwasher, close the water supply valve first, as the guide says.
The hose looks sound yet the code remains.
Your Thermador steps, stored on this device only

If water keeps entering the dishwasher, close the water supply valve first, as the guide says.

If the tub stays dry, check the inlet hose for kinks or damage, as the support page says.

A closed or partly closed tap starves the fill.

Both readings end in service in the guide, so book a technician if the code stays.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The web page says water cannot get in. The guide, for the E:34-00 display, says water is continuously running in. Both are Thermador documents, so we print both.
Read the supporting manualClose the water supply valve, then get service.
Read the supporting manualThe support page treats them as one entry. The guide gives E3400 the running-water reading.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E3300 & E3400"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Sources: the Thermador dishwasher error-code page and the DWHD660EFM use and care guide, pp. 33 to 35 (E:34-00).
Watch the tub. Water that will not stop points to the guide; no water points to the support page.
It can overfill, so closing the valve is the guide's first step.
Yes, E:34-00 is simply the spelling the DWHD660EFM guide uses for E3400. It describes water running in continuously.
Only the DWHD660EFM carries the wording about water running in continuously. Other models fall under the general support listing.
Thermador messages, symptoms, parts, repair visits
E16 suggests water may not be getting into the Thermador dishwasher through the filling system. Inspect the inlet hose for kinks and damage.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.