What it means
E3300 shares an entry with E3400 on Thermador's page: there is an issue with water flowing into the dishwasher or the filling system, and water may not be able to enter. Check that the inlet hose is not kinked or damaged.
Thermador dishwasher E3300 / Water and power supply
E3300 shares an entry with E3400 on Thermador's page: there is an issue with water flowing into the dishwasher or the filling system, and water may not be able to enter. Check that the inlet hose is not kinked or damaged.
Also appears as E3300
E3300 shares an entry with E3400 on Thermador's page: there is an issue with water flowing into the dishwasher or the filling system, and water may not be able to enter. Check that the inlet hose is not kinked or damaged.
Follow it from the tap to the dishwasher and look for a kink.
The hose looks sound yet the code remains.
Your Thermador steps, stored on this device only

Follow it from the tap to the dishwasher and look for a kink.

Cracked or crushed hose needs replacing, not straightening.

Make sure the tap feeding the dishwasher is fully open.

If the hose looks sound and E3300 stays, a technician tests the filling system.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The filling system: water may not be able to enter the dishwasher. The only owner check printed is the inlet hose.
Read the supporting manualThe support page prints them together with one meaning. The DWHD660EFM guide reads E3400 differently, as water running in continuously.
Read the supporting manualE16 and E17 carry the same wording in the shorter display style.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E3300 & E3400"
Sources: the Thermador dishwasher error-code page, entry E3300 and E3400, and the DWHD660EFM guide where E3400 is read differently.
No. The Thermador manual asks you to check it for kinks and damage, not to replace it by default.
Looking at the hose does not need tools; pulling the dishwasher out may need help.
No. E3100 and E15 are the codes that report a leak.
When the hose looks fine and the code remains.
Thermador messages, symptoms, parts, repair visits
E16 suggests water may not be getting into the Thermador dishwasher through the filling system. Inspect the inlet hose for kinks and damage.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.