What it means
F4 on a Thermador range means the electronics overheated and all cooking zones were shut down. Wait for the electronics to cool, then touch any control.
Thermador range F4 / Overheating
F4 on a Thermador range means the electronics overheated and all cooking zones were shut down. Wait for the electronics to cool, then touch any control.
Also appears as F4
F4 on a Thermador range means the electronics overheated and all cooking zones were shut down. Wait for the electronics to cool, then touch any control.
All zones are off, so food stops heating.
F4 returns after cooling.
Your Thermador steps, stored on this device only

All zones are off, so food stops heating.

Wait until the electronics have cooled sufficiently.

This acknowledges the message.

When the message has disappeared.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
F4 means the electronics overheated and all cooking zones switched off.
Read the supporting manualF2 switches off only the corresponding zone.
Read the supporting manualYes, the ranges page lists F4 or E7015 as one entry.
Read the supporting manualIts row for all cooking zones switching off names the same single cause, overheated electronics, with the same three steps as the single-zone row.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "F4 or E7015"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p10, p53
Source: the ranges page of Thermador's oven support section, entry F4 or E7015. The Pro Harmony induction range guide prints the matching troubleshooting row and the cookware warning.
Until the electronics are cool; no minutes are given.
The entry does not mention the oven. F4 concerns all cooking zones being shut down.
Check each dish before eating it, since heating stopped when the zones shut down.
Book a visit if F4 keeps returning after the electronics have cooled.
Thermador messages, symptoms, parts, repair visits
F2 on a Thermador range means the electronics overheated and the related cooking zone was shut down. Wait for cooling, then touch any control.
On a Thermador Pro range, each rangetop burner has its own igniter and should catch within four seconds. If one will not, Thermador’s first suspect is a burner cap sitting out of alignment. Reseat it, dry everything, and check the knob. Several burners dead, or sparking that never stops, needs a technician.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.