Inside the appliance
Hood grease filter. In plain English.
Grease filters catch cooking grease inside a Thermador hood. A FILTER light asks for a clean: after 40 hours on professional hoods, after 30 hours of blower time on the downdraft. The sources conflict on the dishwasher: the hood guide says hand-wash only, the support page allows an empty one.

Where it fits.
Hood grease filter in the appliance
Inside the hood body, seated over removable grease trays; the guide says the trays go in before the filters.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Hood grease filter concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Let the hood cool
Wait until the grease has cooled and solidified before you take any part out.
- 2
Wash and dry
Soak and wash with hot, mild-detergent water, then dry the filters and their trays fully before reinstalling.
- 3
Reset the reminder
Professional hoods: press and hold FILTER for 3 seconds until it beeps. Downdraft: touch and hold FILTER for 2 seconds or more.
Cleaning or replacement?
Leave internal testing to a technician.
FILTER lights again right after a clean and reset.
A filter vibrates after it is back in place.
Arrange a diagnosticSources and model boundaries.
These documents back up the Hood grease filter guidance. Choose the manual written for your model.
- Use and Care Guide, Professional Series Hoods PH30HWS PH36HWS PH48HWS and others
- Use and Care Guide UCVM30XS, UCVM36XS Masterpiece Series Downdraft Hood
- How to Clean Grease Filters| Ventilation Support | Thermador
Match your model to the guide it shipped with. See how we research these pages.
Can grease filters go in a dishwasher?
The two sources conflict. The Pro hood guide says hand-wash only to avoid discoloration; the support page says an empty dishwasher works, with slight discoloration.
Why is my filter rattling?
Thermador's troubleshooting page says a loose filter vibrates; secure it to the grease tray.
Can I cook while the filters are out?
Thermador's guide asks you not to run the cooktop, rangetop or range while the hood is apart.
When should I book?
When the reminder or the noise returns after the clean.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
FILTER lit
FILTER lit on a Thermador hood is a cleaning reminder after 40 hours of operation. Clean the filters, then press and hold FILTER for 3 seconds until it beeps.
Thermador hood not venting properly
Thermador’s hood guides blame weak venting on the installation more often than on the hood: it may sit too high or off-center, make-up air may be short, wind may be pushing in through an open window, or the duct may be blocked, too long or full of elbows. Close windows, clear the duct opening, then book a visit.
Hood repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.


