Thermador hood FILTER blinking (downdraft) / Filter reminders

Thermador hood
code FILTER blinking (downdraft)

Hood / display referenceFILTER blinking (downdraft)

FILTER blinking on a Thermador downdraft hood is a cleaning reminder after 30 hours of blower run time. Clean the filter, then touch and hold the FILTER icon for 2 seconds or longer to reset it.

Also appears as FILTER blinking (downdraft)

Last reviewed

Hood / display referenceFILTER blinking (downdraft)
Meaning
FILTER blinking on a Thermador downdraft hood is a cleaning reminder after 30 hours of blower run time. Clean the filter, then touch and hold the FILTER icon for 2 seconds or longer to reset it.
Who handles it
Informational
Related codes
Source
Use and Care Guide UCVM30XS, UCVM36XS Masterpiece Series Downdraft Hood

What Thermador hood FILTER blinking (downdraft) means.

What it means

FILTER blinking on a Thermador downdraft hood is a cleaning reminder after 30 hours of blower run time. Clean the filter, then touch and hold the FILTER icon for 2 seconds or longer to reset it.

What you can safely check

Take it out following the hood guide.

When to call a technician

The icon keeps blinking after reset.

Your Thermador steps, stored on this device only

Safe checks, in order.

0 of 4 checks done
  1. Thermador hood FILTER blinking (downdraft): A built-in refrigerator panel flush with cabinetry
    Illustration. Follow your model’s instructions.
    Before you begin

    Remove the filter

    Take it out following the hood guide.

  2. A technician in a navy shirt holds a tablet showing five empty checkboxes beside a built-in wall oven in a navy kitchen.
    Illustration. Follow your model’s instructions.
    Check 2

    Clean it

    Use the cleaning method in the use and care guide.

  3. A technician inspecting a gas burner on a range
    Illustration. Follow your model’s instructions.
    Check 3

    Refit it

    Make sure it seats properly.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Reset the reminder

    Touch and hold FILTER for 2 seconds or more.

Is FILTER blinking (downdraft) still on the display?

Give us your model number and the checks you already made, then start your request below.

Book a visit

Hood ventilation.

Conceptual Range hood sectionGrease filtersBlowerDuct or charcoal filterControls and lights1234
  1. 4Controls and lights

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Parts behind the message.

Two hands hold a steel baffle grease filter streaked with grease over a sink of warm soapy water, a hood behind.

Component reference

Hood grease filter

Grease filters catch cooking grease inside a Thermador hood.

Read the definition

A little more context.

How does it differ from FILTER lit?

On chimney and Professional hoods the button lights after 40 hours instead.

Read the supporting manual

What do I clean when FILTER blinks?

There are two grease filters behind the removable front panel at the bottom of the intake housing. Lift the panel up and pivot it out, then take the filters out. Refit them with the half-moon openings facing out.

Read the supporting manual

Is a blinking AUTO icon the same thing?

No. When the hood detects excessive heat, the AUTO icon blinks 3 times and the fan speeds up. The lower speeds cannot be selected until the hood cools down. That is the over-temperature sensor, separate from the FILTER reminder.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use and Care Guide UCVM30XS, UCVM36XS Masterpiece Series Downdraft Hood

BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)

PDF created 22.08.2019; file tag _A (no printed edition date read) / PDF p8

Manufacturer document

Use and Care Guide UCVP36XS Masterpiece Series Downdraft Hood

BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)

PDF created 22.08.2019; file tag _A (no printed edition date read) / PDF p8

Sources: the use and care guides for the Thermador Masterpiece downdraft hoods UCVM30XS, UCVM36XS and UCVP36XS, p. 8.

Here to help

Good questions.
Clear answers.

Talk to our team
Does the blinking stop on its own?

Not until you reset it. Clean the filter first, then touch and hold the FILTER icon for 2 seconds or longer.

What if it keeps blinking?

Book a visit if the icon keeps blinking after you have cleaned the filters, refitted them and held FILTER for 2 seconds or longer.

Which filter?

The grease filters. There are two behind the removable front panel at the bottom of the intake housing, and the guide asks for cleaning at least every two months whatever the reminder says.

How long to hold?

Touch and hold the FILTER icon for 2 seconds or longer after cleaning the filter, and the reminder resets.

Is there a second filter to replace?

Only if the hood recirculates. The guide says to replace the charcoal filter, part number UCVFILTER, behind the decorative cover plate on the toe kick or base of the cabinet. The grease filters are cleaned, not replaced.

Let’s take care of it.

One burner, two burners,
or the whole range.