Thermador range F1 / Overheating

Thermador range
code F1

Range / display reference

F1 on a Thermador range means a cooking zone overheated and shut off to protect the work surface. Wait for the electronics to cool, then switch the zone back on.

Also appears as F1

Last reviewed

Range / display reference
Meaning
F1 on a Thermador range means a cooking zone overheated and shut off to protect the work surface. Wait for the electronics to cool, then switch the zone back on.
Who handles it
Cool down, then book
Related codes
Source
Ranges | Ovens Support | Thermador

What Thermador range F1 means.

What it means

F1 on a Thermador range means a cooking zone overheated and shut off to protect the work surface. Wait for the electronics to cool, then switch the zone back on.

What you can safely check

Take the cookware off the zone that shut down.

When to call a technician

F1 returns after cooling.

Your Thermador steps, stored on this device only

Safe checks, in order.

0 of 4 checks done
  1. Thermador range F1: Gas range with a roasting pan and roast visible through the oven glass, rear vent slots above the burners and a hand resting near the control knobs.
    Illustration. Follow your model’s instructions.
    Before you begin

    Lift the pan off

    Take the cookware off the zone that shut down.

  2. A built-in refrigerator panel flush with cabinetry
    Illustration. Follow your model’s instructions.
    Check 2

    Wait for the electronics

    Wait until they have cooled down sufficiently.

  3. A technician in a navy shirt holds a tablet showing five empty checkboxes beside a built-in wall oven in a navy kitchen.
    Illustration. Follow your model’s instructions.
    Check 3

    Switch the zone on

    Then continue cooking.

  4. A technician inspecting a gas burner on a range
    Illustration. Follow your model’s instructions.
    Check 4

    Note repeats

    If F1 returns, record which zone it was.

Is F1 still on the display?

Give us your model number and the checks you already made, then start your request below.

Book a visit

Bake and broil heat.

Conceptual Range / oven sectionBake element / burnerBroil elementGas igniterControl1234
  1. 1Bake element / burner
  2. 2Broil element
  3. 4Control

A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

A little more context.

What cookware habits does the range guide warn about?

In its list of ways to avoid damage, the Pro Harmony guide says overheating can damage the cookware and tells owners not to heat empty pots or pans. It also says never to use the cooktop as a working surface or for setting things down.

Read the supporting manual

The manual behind the message.

Manufacturer document

Ranges | Ovens Support | Thermador

Thermador / BSH Home Appliances (thermador.com/us support page)

Undated web page; fetched 12.11.2026 / entry "F1 or F6"

Manufacturer document

Use and care guide, Professional Series Pro Harmony Induction Ranges PRI30LBHU PRI30LBHC PRI36LBHU PRI36LBHC (en-us)

BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)

PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p10, p53

Source: the ranges page of Thermador's oven support section, entry F1 or F6. The Pro Harmony induction range guide prints the matching troubleshooting row and the cookware cautions.

Here to help

Good questions.
Clear answers.

Talk to our team
How long must I wait?

No time is printed. Take the pan off the zone and wait until the electronics have cooled down sufficiently, then switch the zone back on.

Is the work surface damaged?

The Thermador manual reports no damage. F1 describes a cooking zone that overheated and shut off to protect the work surface, so lift the pan off and let it cool.

Do the other zones keep working?

The Thermador manual speaks only of the zone that shut off, so it does not say. Note which zone it was if F1 returns.

When do I book?

Book a visit if F1 returns after the zone has cooled. Record which zone it was when you call.

Let’s take care of it.

One burner, two burners,
or the whole range.