What it means
E3100 means the safety switch detected water in the base of the dishwasher and the leakage protection is active. Turn off the water inflow, then book a technician.
Thermador dishwasher E3100 / Water and power supply
E3100 means the safety switch detected water in the base of the dishwasher and the leakage protection is active. Turn off the water inflow, then book a technician.
Also appears as E3100
E3100 means the safety switch detected water in the base of the dishwasher and the leakage protection is active. Turn off the water inflow, then book a technician.
Turn off the water inflow first, as the Thermador manual directs.
E3100 appears.
Your Thermador steps, stored on this device only

Turn off the water inflow first, as the Thermador manual directs.

Check for water under or around the dishwasher.

Do not start cycles while the leakage protection is active.

A technician can trace where the water entered the base.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.

Component reference
The dishwasher leakage safety switch sits in the base of a Thermador dishwasher and detects water there.
Read the definitionA safety switch that detects water in the base of the dishwasher and activates the protection system.
Read the supporting manualThe Thermador manual tells you to close the inflow before anything else, so no more water reaches the base.
Read the supporting manualE3000 concerns water coming in; E3100 reports water where it should not be.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E3100"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 05.08.2026; file tag _C (no printed edition date read) / PDF p33-35 (troubleshooting table)
Source: the Thermador dishwasher error-code page, entry E3100.
Yes. E15 prints the same wording in the shorter style.
The Thermador manual lists no reset, only turning off the water and getting help.
If water is on the floor near the outlet, keep clear and get it dry before touching the plug.
Water in the base means a leak risk, so act the same day.
Thermador messages, symptoms, parts, repair visits
E15 means the safety switch found water in the base of the Thermador dishwasher and the leakage protection activated. Shut the water valve that feeds the dishwasher, then book a technician.
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
The dishwasher leakage safety switch sits in the base of a Thermador dishwasher and detects water there. When it does, the leakage protection (water protection system) activates and the display shows E15, E3100 or E:31-00. Thermador's step is to turn off the water supply; the cause needs a technician.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.