What it means
E9010 on a Thermador range has the same wording as E9000: the supply voltage is outside the normal range. Have the supply checked and book a visit.
Thermador range E9010 / Power supply
E9010 on a Thermador range has the same wording as E9000: the supply voltage is outside the normal range. Have the supply checked and book a visit.
Also appears as E9010
E9010 on a Thermador range has the same wording as E9000: the supply voltage is outside the normal range. Have the supply checked and book a visit.
Mains power is involved.
The code appears on more than one use.
Your Thermador steps, stored on this device only

Thermador prints E9000 and E9010 together, so either may appear.

Trouble elsewhere in the house points at the supply.

Leave wiring alone.

Tell us when the code appears.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The ranges page lists them as one entry with one meaning.
Read the supporting manualLittle beyond symptoms elsewhere; the supply is for an electrician.
Read the supporting manualU400 prints the same wording on the induction page.
Read the supporting manualIts cooktop troubleshooting table has a row with the same wording: the supply voltage is incorrect and outside the normal operating range. The only action printed is to contact your electrical utility provider.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E9000 or E9010"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 24.04.2023; file tag _D (no printed edition date read) / PDF p53
Source: the ranges page of Thermador's oven support section, entry E9000 or E9010. The Pro Harmony induction range guide prints the same supply-voltage row.
Either; the Thermador manual says outside the normal operating range, so it does not separate low from high. Have the supply checked by an electrician.
No. The Thermador manual lists no breaker reset for E9010. Its only action is to have the supply checked, and the Pro Harmony guide says to contact your electrical utility provider.
The Thermador manual does not say, so stop if it repeats. Leave the range closed, and have an electrician check the supply before cooking on it again.
The utility or an electrician, since the supply is outside the normal operating range. We can check the range side when you book a visit.
Not in the troubleshooting table. The row says only that the supply is outside the normal operating range, so ask the installer or an electrician to compare the supply with the range's rating.
Thermador messages, symptoms, parts, repair visits
E9000 on a Thermador range means the supply voltage is outside the normal range. The Thermador manual has no owner step; have the supply checked by an electrician.
On a Thermador Pro range, each rangetop burner has its own igniter and should catch within four seconds. If one will not, Thermador’s first suspect is a burner cap sitting out of alignment. Reseat it, dry everything, and check the knob. Several burners dead, or sparking that never stops, needs a technician.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.