On this page
- The reminder is 30 hours on UCVM downdraft hoods and 40 hours on the others we read. 1234
- Reset by holding FILTER: 2 seconds or more on the downdraft hood, 3 seconds with a beep on the others. 123
- Professional Series filters are hand-wash only; other hoods allow a dishwasher with possible discoloration. 1234
- Wash grease filters about every second month, whatever the light says. 14
What does the FILTER light on a Thermador hood mean?#
It means the hood has run long enough that its grease filters need washing. It is a reminder, not an error message, and on every hood we read the cure is the same: wash the filters, then restart the count. 1234
The hood counts blower run time. When the count is reached, the FILTER light on the control panel switches on or starts blinking, depending on the model. Nothing else changes: the fan, the lights and the speed keys keep working. That is why the light is so easy to ignore for months, and why a hood that now smells of old grease or pulls less air often turns out to need only its filters washed.
Is it blinking at 30 hours or lit at 40?#
It depends on the hood. The UCVM downdraft hoods blink the FILTER icon after 30 hours of accumulated blower run time. The Professional, chimney wall and custom insert hoods light FILTER after 40 hours. 1234
| Hood family (our sources) | What FILTER does | How to reset it |
|---|---|---|
| UCVM30XS and UCVM36XS downdraft | Icon blinks after 30 hours of blower time | Touch and hold FILTER for 2 seconds or more 1 |
| Professional Series canopy and island | Light comes on after 40 hours | Hold FILTER 3 seconds and wait for the beep 2 |
| Masterpiece chimney wall hoods | Button lights after 40 hours | Hold FILTER 3 seconds and wait for the beep 3 |
| Masterpiece custom insert hoods | Button lights after 40 hours | Hold FILTER for 3 seconds 4 |
On the chimney and insert hoods, the Home Connect app can also send you a clean filter notification when it is switched on in settings, and shows the filter saturation state. 34 If your hood has a different model number, find the matching chapter in its manual.
How should the filters be cleaned?#
Let the hood cool and the grease set first, then slide the filters out and wash them in hot water with a mild detergent. Rinse, shake or drip dry, and refit them ahead of cooking. 25
The edges can be sharp, so handle them with care. 5 Thermador's support page says to clean metal grease filters every 1 to 3 months, depending on use, and tells you to identify your filter type first: mesh, baffle or downdraft. 5 Over a grill, a wok or other greasy cooking, the Professional manual says more frequent cleaning may be necessary. 2
- 1
- 2
- 3
- 4
- 5
Can I use the dishwasher?#
Only if your manual says so. The Professional Series manual says the filters are not dishwasher safe, to avoid discoloration, and to hand-wash only. The downdraft, chimney and insert manuals allow a dishwasher. 1234
For those hoods the manuals add conditions. The downdraft manual asks for a non-phosphate detergent, and the filters loosely placed on the top rack without being jammed in, on a Normal cycle. 1 The chimney and insert manuals say slight discoloration can occur and does not change how the filter works. 34 Extremely greasy filters should not share a load with dishes. 14 When you cannot tell which family your hood is in, soak and hand-wash; every manual allows it.
How is the reminder reset?#
Once the filters are washed and refitted, press and hold FILTER. On the Professional, chimney and insert hoods hold it 3 seconds and wait for the beep; on the downdraft, hold it for 2 seconds or more. 1234
The Professional manual states what that does: the 40-hour period is reset and the reminder turns off. 2 If you reset it before cleaning, the light goes out but the grease is still in the mesh, and the next reminder will not arrive for another 30 or 40 hours. Clean first, reset second.
What if the hood beeps twice or the FILTER light behaves oddly?#
Two short beeps mean a key was pressed in a way the hood treats as a control tone request. Press and hold FILTER and LIGHTS together for 3 seconds to turn the control tone off or on. 2
That same combination silences the beeps on the chimney and insert hoods, and the Home Connect app can change the control tone too. 34 If the FILTER light stays on even after you cleaned the filters and held the key for the full time, note the model and book a visit; no manual we read gives a different remedy.
Why do clean filters not always fix weak airflow?#
Because the filter is one of several causes. The Professional manual's troubleshooting table lists ductwork that is too small, too large or loose, a blocked duct opening, wind from open windows, too little make-up air and a hood mounted too high or off-center. 2
Clean filters rule out one item on that list. The others are installation matters; the manual points to the installation guide for them. If the filters are clean, the windows are shut and the hood still pulls poorly, a technician can check the duct run and the blower. Our cooktop and range pages show how a visit takes in the whole kitchen.
The light stays on after cleaning; what now?#
Should FILTER stay lit even after a deep clean and a key hold of the full time, if airflow stays weak with clean filters and a clear duct, if the fan and lights are both dead, or if a filter is bent or will not latch, the hood needs a technician's attention. 23
The manuals name Thermador's customer service. For an independent option, request a technician through us. Hoods inside Thermador's warranty are repaired by Thermador; our own workmanship has its own coverage. The price is discussed with you ahead of any work and fixed after the on-site diagnostic.
Sources#
- Use and Care GUIDE: UCVM30XS, UCVM36XS Masterpiece Series Downdraft HoodThermador (BSH Home Appliances), mixed print edition · File tag 8001154567_A · PDF pages 5 (fire warning), 8 (filter clean reminder), 9-10 (cleaning grease filters)
- Use and care GUIDE: Professional Series Hoods PH30HWS, PH36HWS, PH48HWS and related modelsThermador (BSH Home Appliances), en-us edition · File tag 8001265295_A · PDF pages 9-10 (clean filter reminder), 11 (cleaning filters and grease trays), 13 (troubleshooting)
- Use and Care GUIDE: Thermador Masterpiece Chimney Wall HoodsThermador (BSH Home Appliances), mixed print edition · File tag 8001369740_A · PDF pages 10 (clean filter reminder), 15 (grease filters cleaning)
- Use and care GUIDE: VCI3B30ZS, VCI3B36ZS, VCI6B30ZS, VCI6B36ZS Masterpiece Custom Insert HoodsThermador (BSH Home Appliances), mixed print edition · File tag 9001604429_A · PDF pages 10 (clean filter reminder), 16 (metal grease filter cleaning)
- How to Clean Grease Filters | Ventilation Support | ThermadorThermador (thermador.com, US support site) · Page undated; retrieved 12.11.2026 · Page text on cleaning intervals and mesh filters







