Inside the appliance
Microwave waveguide cover. In plain English.
Inside the top of a Thermador MicroDrawer microwave sits a waveguide cover made of mica, which needs special care. Wipe spatters off in place with a soft damp cloth straight away, since a crust of splashes can overheat, smoke or even ignite. Never take the cover out.

Where it fits.
Microwave waveguide cover in the appliance
On the inside top of the drawer area, marked DO NOT REMOVE in the guide's part names.
The picture stands for a type of component. Which replacement suits your model is a separate question.
What shifts when this system needs a look.
Microwave waveguide cover concerns may show up next to a drop in performance or a message that keeps returning. Testing comes before any verdict on the component.

Thermador microwave won’t start
When a Thermador built-in microwave’s display works but the oven will not run, the guide asks you to confirm the door is shut with nothing caught in the seal, the door is undamaged and demo mode is off. A fully dead display points to the breaker, fuse or plug.

Thermador microwave sparking
Sparks or arcing in a Thermador microwave come from metal in the cavity. Stop the oven and take out the metal. If you use aluminum foil, keep it to narrow strips an inch or more clear of the interior walls.
Owner care, within the model instructions.
Turn the appliance off and pull the plug before doing any check yourself. Look out for standing water and sharp edges. Never handle a wet plug, remove a service panel or step beyond what your model's guide permits an owner.
- 1
Wipe spatters at once
Wipe the cover with a soft, slightly damp cloth right after a splash. Baked-on food can overheat.
- 2
Do not remove it
Both the unpacking steps and the cleaning section say DO NOT REMOVE this cover.
- 3
Look for damage
Stop using the microwave if the drawer or its seals look damaged, and ask your dealer.
- 4
Keep spills off the sealing surfaces
Keep spills off the drawer sealing surfaces. Wash them with mild soap on a damp cloth, never an abrasive pad.
Cleaning or replacement?
Leave internal testing to a technician.
Smoke or a burning smell shows up while the microwave runs.
The cover looks scorched, cracked or loose.
Arrange a diagnosticSources and model boundaries.
These documents back up the Microwave waveguide cover guidance. Choose the manual written for your model.
- Use and Care Guide, Built-in MicroDrawer Microwave Oven MD24BS MD30BS
Match your model to the guide it shipped with. See how we research these pages.
What is the waveguide cover made of?
Mica, which is why it needs special care.
Can I take the cover out to clean it?
Leave it in place and wipe it where it sits, using a soft damp cloth.
What happens if spatters build up?
A crust of splashes can overheat and may smoke or catch fire.
Where is it?
At the top of the cavity above the drawer, marked as item 2 in the part names.
Thermador messages, symptoms, parts, repair visits
Move from the message to your next step.
Thermador microwave won’t start
When a Thermador built-in microwave’s display works but the oven will not run, the guide asks you to confirm the door is shut with nothing caught in the seal, the door is undamaged and demo mode is off. A fully dead display points to the breaker, fuse or plug.
Microwave repair
Book a diagnostic made for your exact model and performed at the appliance itself.
Find your metro
Where the offices are, and what to tell us about getting in.

