What it means
E7010 on a Thermador range means the cooktop cannot reach your home Wi-Fi or the hood. Switch the appliance off and on again; a one-off message goes away.
Thermador range E7010 / Connection
E7010 on a Thermador range means the cooktop cannot reach your home Wi-Fi or the hood. Switch the appliance off and on again; a one-off message goes away.
Also appears as E7010
E7010 on a Thermador range means the cooktop cannot reach your home Wi-Fi or the hood. Switch the appliance off and on again; a one-off message goes away.
If a hood is paired with the range, make sure it has power.
E7010 returns after the restart.
Your Thermador steps, stored on this device only

If a hood is paired with the range, make sure it has power.

Confirm your home Wi-Fi is up and reaches the range.

Restart the appliance; the Thermador manual says a one-off message then disappears.
Mention your router and whether a hood is paired.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The cooktop section cannot connect to your home network or to the hood.
Read the supporting manualNo. The supply messages are E9000, E9010, E9011 and U400.
Read the supporting manualThe Thermador manual says a one-off occurrence disappears after the restart.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E7010"
Source: the ranges page of Thermador's oven support section, entry E7010.
Thermador does not say that E7010 stops cooking. It concerns the cooktop's link to your Wi-Fi or the hood.
It is one of the two connections the Thermador manual names.
It could, since the home network is the other named connection.
Book a visit when E7010 keeps returning after you switch the appliance off and on again.
Thermador messages, symptoms, parts, repair visits
On a Thermador Pro range, each rangetop burner has its own igniter and should catch within four seconds. If one will not, Thermador’s first suspect is a burner cap sitting out of alignment. Reseat it, dry everything, and check the knob. Several burners dead, or sparking that never stops, needs a technician.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.