What it means
E11 on a Thermador wall oven comes from the microwave and speed oven page: the touch buttons are not working properly, possibly from condensation. Wipe the panel dry and switch the fuse off for 10 seconds.
Thermador oven E11 / Controls
E11 on a Thermador wall oven comes from the microwave and speed oven page: the touch buttons are not working properly, possibly from condensation. Wipe the panel dry and switch the fuse off for 10 seconds.
Also appears as E11
E11 on a Thermador wall oven comes from the microwave and speed oven page: the touch buttons are not working properly, possibly from condensation. Wipe the panel dry and switch the fuse off for 10 seconds.
Use a dry cloth.
E11 returns after the reset.
Your Thermador steps, stored on this device only

Use a dry cloth.

Switch the fuse off in the fuse box.

Then switch it back on.

If the keys still misbehave, book a visit.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
Our record follows the microwave and speed oven page; the ovens page does not list it.
Read the supporting manualCondensation on the keypad.
Read the supporting manualThe speed oven shows Humidity Sensor Error and Temperature Sensor Error as separate messages.
Read the supporting manualBoth the MC30WS speed oven guide and the MB30WS microwave guide say that if the touch-button problem persists, the appliance should be shut off and a servicer should check whether it is properly grounded.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E11 and a phone number"
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 06.03.2018; file tag _I (no printed edition date read) / PDF p35
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
file tag _I (PDF creation date not printed in the cached text) / PDF p25
Source: the error-code page for Thermador microwaves and speed ovens, entry E11. The MC30WS speed oven and MB30WS microwave guides print the keypad condensation row.
The sources tie it to speed ovens and microwaves. Our record follows the microwave and speed oven page, and the ovens page does not list E11.
No. Wipe the panel with a dry cloth, because the Thermador manual ties E11 to condensation on the touch buttons, and moisture is what you are removing.
Switch the fuse off for 10 seconds, then back on. Dry the panel first, since the Thermador manual links the touch-button problem to condensation.
Book a visit if the keys still misbehave after the dry wipe and the 10-second fuse reset. The guides say a servicer should then check whether the appliance is properly grounded.
Not in the Professional or Masterpiece wall oven guides we cached. Their table only covers an "E" and a number with beeping: press TIMERS to stop it, reset the oven if necessary, then book a technician if it returns.
Thermador messages, symptoms, parts, repair visits
Humidity Sensor Error on a Thermador MC30WS speed oven means the display reports a sensor problem. Touch the display and re-enter your settings; if it happens again, book a visit.
One reset appears on Thermador's oven support page and in its built-in oven guides for a door that will not release even when the oven is cool: cut the oven's power at the circuit breaker, wait five minutes, restore power and let the oven reset itself. While a self-clean cycle runs, a shut door is expected.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.