What it means
Temperature Sensor Error on a Thermador MC30WS speed oven is a display message. Touch the display and re-enter your settings; the guide says service is needed only if the error occurs again.
Thermador oven Temperature Sensor Error / Sensors
Temperature Sensor Error on a Thermador MC30WS speed oven is a display message. Touch the display and re-enter your settings; the guide says service is needed only if the error occurs again.
Also appears as Temperature Sensor Error
Temperature Sensor Error on a Thermador MC30WS speed oven is a display message. Touch the display and re-enter your settings; the guide says service is needed only if the error occurs again.
This acknowledges the message.
The message returns after re-entering settings.
Your Thermador steps, stored on this device only

This acknowledges the message.

Set time, mode and temperature from the start.

Note whether the error returns on every program or only one.

A returning error is the guide's cue for service.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
A temperature sensor error, with no cause stated in the guide.
Read the supporting manualThe guide lists both with the same re-entry step. They name different sensors.
Read the supporting manualYes, a plain Temperature Error is listed in the same table with the same step.
Read the supporting manualOnly the MC30WS speed oven guide lists Temperature Sensor Error and Temperature Error. The MB30WS microwave guide's table has just Humidity Sensor Error, so a plain microwave is not expected to show either temperature message.
Read the supporting manualManufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 06.03.2018; file tag _I (no printed edition date read) / PDF p35
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
file tag _I (PDF creation date not printed in the cached text) / PDF p25
Source: the use and care guide for the Thermador Masterpiece speed oven MC30WS, troubleshooting table, p. 35. The MB30WS microwave guide is cited for the comparison only.
No, you re-enter them. Touch the display to acknowledge the message, then set time, mode and temperature again from the start.
The guide does not rate it. It treats Temperature Sensor Error as a message to clear and says service is needed only if the error occurs again.
The MC30WS speed oven guide lists it. The MB30WS microwave guide's table has only Humidity Sensor Error, so a plain microwave is not expected to show it.
The guide names none. Its only step is to touch the display and re-enter your settings, with service needed only if the error returns.
Thermador messages, symptoms, parts, repair visits
Humidity Sensor Error on a Thermador MC30WS speed oven means the display reports a sensor problem. Touch the display and re-enter your settings; if it happens again, book a visit.
One reset appears on Thermador's oven support page and in its built-in oven guides for a door that will not release even when the oven is cool: cut the oven's power at the circuit breaker, wait five minutes, restore power and let the oven reset itself. While a self-clean cycle runs, a shut door is expected.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.