What it means
Humidity Sensor Error on a Thermador MC30WS speed oven means the display reports a sensor problem. Touch the display and re-enter your settings; if it happens again, book a visit.
Thermador oven Humidity Sensor Error / Sensors
Humidity Sensor Error on a Thermador MC30WS speed oven means the display reports a sensor problem. Touch the display and re-enter your settings; if it happens again, book a visit.
Also appears as Humidity Sensor Error
Humidity Sensor Error on a Thermador MC30WS speed oven means the display reports a sensor problem. Touch the display and re-enter your settings; if it happens again, book a visit.
This clears the message.
The message returns after re-entering settings.
Your Thermador steps, stored on this device only

This clears the message.

Set the program again.

Cook with a time and power instead of sensor settings if it repeats.

The guide says service is needed if the error occurs again.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
Only that the humidity sensor reported an error; the guide gives no cause.
Read the supporting manualThey are separate messages with the same remedy.
Read the supporting manualNot rated.
Read the supporting manualNo. The MB30WS microwave guide lists the same message with the same re-entry step, and it lists neither Temperature Sensor Error nor Temperature Error. The MC30WS speed oven guide lists all three.
Read the supporting manualManufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 06.03.2018; file tag _I (no printed edition date read) / PDF p35
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
file tag _I (PDF creation date not printed in the cached text) / PDF p25
Source: the use and care guide for the Thermador Masterpiece speed oven MC30WS, troubleshooting table. The MB30WS microwave guide lists the same message.
The MC30WS speed oven shows it, and the MB30WS microwave guide lists the same message with the same re-entry step.
Yes, re-enter them. Touch the display to clear the message, then set the program again, or cook with a manual time and power if it repeats.
The guide does not say. It lists only a sensor problem reported on the display, with no cause, so a repeat is the cue for service.
Book a visit if the message recurs after you re-enter your settings. The guide says service is needed if the error occurs again.
Only in scope. The MB30WS microwave guide has the Humidity Sensor Error row with the same step, touch the display and re-enter settings, but no temperature-sensor rows.
Thermador messages, symptoms, parts, repair visits
Temperature Sensor Error on a Thermador MC30WS speed oven is a display message. Touch the display and re-enter your settings; the guide says service is needed only if the error occurs again.
One reset appears on Thermador's oven support page and in its built-in oven guides for a door that will not release even when the oven is cool: cut the oven's power at the circuit breaker, wait five minutes, restore power and let the oven reset itself. While a self-clean cycle runs, a shut door is expected.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.