What it means
UP is not an error on a Thermador dishwasher. It signals that the dishwasher's software has been updated. Press any program button to clear it.
Thermador dishwasher UP / Messages
UP is not an error on a Thermador dishwasher. It signals that the dishwasher's software has been updated. Press any program button to clear it.
Also appears as UP
UP is not an error on a Thermador dishwasher. It signals that the dishwasher's software has been updated. Press any program button to clear it.
Any program button clears the message.
UP stays after you press a program button.
Your Thermador steps, stored on this device only

Any program button clears the message.

Carry on as usual.

If you allow updates, the dishwasher may update itself, which is the likely reason for UP.

If UP comes back every cycle, mention it when you book.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
The software was updated. Thermador says explicitly that it is not an error code.
Read the supporting manualPress any program button to clear it.
Read the supporting manualNo. UP is a notice, while E-codes report problems.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "UP"
Source: the Thermador dishwasher error-code page, entry UP.
No, the Thermador manual says UP is not an error.
The Thermador sources do not mention any settings being lost. UP only signals that the software was updated.
The Thermador manual does not say; software updates are the cause it names.
It could, after a future software update. Press any program button to clear it each time.
Thermador messages, symptoms, parts, repair visits
For a Thermador dishwasher that leaves water behind, the error-code page lists the same four steps for E22, E24 and E25: filter, drain pump cover, drain hose and air gap or hose. The DWHD660EFM guide adds two checks for a display reading E:61-03: remove the garbage disposal plug and keep a high loop in the hose.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.