What it means
The clock shows 12:00 after a power cut, or after the machine was switched off at its power switch. Both erase the stored time and settings. Enter them again and stop using the power switch to turn it off.
Thermador coffee machine 12:00 / Power supply
The clock shows 12:00 after a power cut, or after the machine was switched off at its power switch. Both erase the stored time and settings. Enter them again and stop using the power switch to turn it off.
Also appears as 12:00
The clock shows 12:00 after a power cut, or after the machine was switched off at its power switch. Both erase the stored time and settings. Enter them again and stop using the power switch to turn it off.
Was there an outage, a tripped breaker, or did someone use the power switch?
12:00 appears with no power loss.
Your Thermador steps, stored on this device only

Was there an outage, a tripped breaker, or did someone use the power switch? Any of them explains a return to 12:00.

Enter the time and your settings once more. Thermador's page says to re-enter the values.

The Thermador manual names two habits to drop: switching the machine off at the power switch, and choosing the Off option in the clock display menu.

Resets with no outage and no switch use are worth a written note of the day and time, then a visit.
Give us your model number and the checks you already made, then start your request below.
Book a visit
A simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
It is a reset indicator, not a breakdown. The machine shows 12:00 after a power failure or after being switched off at the power switch, and the stored values need entering again.
Read the supporting manualNot by itself. After an outage, setting the values again is the whole remedy the Thermador manual gives. A visit makes sense when the reset repeats without a power cut.
Read the supporting manualTwo are named: the power switch and the Off option in the clock menu. Skip both and the clock should hold between power cuts.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "12:00"
Source: the error-code page for Thermador coffee machines, which lists no model. It prints the cause and the re-entry step only, so this page goes no further.
Either power failed or the machine was switched off at the power switch. Both wipe the stored time.
The Thermador manual says to re-enter the values, so plan to set the clock and your preferences again.
It is closer to a reset indicator. Nothing has broken; the display lost its settings.
Only when 12:00 returns although the power stayed on and the switch was left alone.
Thermador messages, symptoms, parts, repair visits
A Thermador built-in coffee machine that gives thin froth or takes in no milk usually has limescale, a blocked outlet or suction pipe, unsuitable milk or badly assembled milk parts. Run the descaling program, clean the outlet and tubes, use cold milk with at least 1.5% fat and reassemble the parts wet.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.