What it means
E1601 on a Thermador wall oven appears during a Home Connect software update, with E0211 and E0510 in the same entry. The Thermador manual points to a resolution link without further steps.
Thermador oven E1601 / Home Connect messages
E1601 on a Thermador wall oven appears during a Home Connect software update, with E0211 and E0510 in the same entry. The Thermador manual points to a resolution link without further steps.
Also appears as E1601
E1601 on a Thermador wall oven appears during a Home Connect software update, with E0211 and E0510 in the same entry. The Thermador manual points to a resolution link without further steps.
The code accompanies it.
The code stays after the update finishes.
Your Thermador steps, stored on this device only

The code accompanies it.

Check the update.

Follow the Thermador manual's resolution link.

If E1601 remains, book a visit.
Give us your model number and the checks you already made, then start your request below.
Book a visitA simplified drawing, since the layout shifts from one model to the next. Tap any outlined part for its photo and the check that goes with it.
A Home Connect update error code.
Read the supporting manualThe ovens page treats update codes separately from the beeping E number.
Read the supporting manualThe Thermador manual does not separate them.
Read the supporting manualThe update page lists wall ovens that can receive the Air Fry and Air Sous Vide software, including the single ovens POD301W, PO301W, MED301WS and ME301WS, the double ovens and the combination ovens. On the combination ovens it applies to the primary cavity only.
Read the supporting manualThe Professional oven guide says the oven checks at regular intervals for Home Connect software updates. The app informs you, and you start the installation from the oven's basic settings, or from the app on your home network. The app tells you when it is complete.
Read the supporting manualThe support page prints E1601, while the update page prints E1610 beside E0211 and E0510. Both are Thermador pages, so read the digits carefully and report exactly what is shown.
Read the supporting manualManufacturer document
Thermador / BSH Home Appliances (thermador.com/us support page)
Undated web page; fetched 12.11.2026 / entry "E0211, E1601, E0510 appear during a Home Connect software update"
Manufacturer document
Thermador / BSH Home Appliances (thermador.com/us page)
Undated web page; fetched 12.11.2026 / entry "What Happens if I See an Error Display on the Screen? E0211, E1610, E0510"; model lists
Manufacturer document
BSH Home Appliances Corporation (Thermador US manual PDF, media3.bsh-group.com)
PDF created 09.10.2023; file tag 8001252117_B (no printed edition date read) / PDF p30
Source: the error-code page for Thermador ovens, entry for E0211, E1601 and E0510. The smart appliance update page lists the capable models; the Professional oven guide describes the update flow.
Not stated. The Thermador manual says only that E1601 appears during a Home Connect software update, with E0211 and E0510, and gives no cooking limits.
The update runs through Home Connect, so a network is involved, but the Thermador manual does not call E1601 a Wi-Fi error. Check the update in the app.
It points to a resolution link without further steps. Let the update finish, check it in the app, then follow the link if E1601 remains.
Book a visit if E1601 stays after the update finishes and the resolution link has been followed.
The update page lists single, double, steam and combination wall ovens, such as POD301W, MED302WS and PODS301W. It does not say which of them showed a code, so give us your exact model when you book.
Thermador messages, symptoms, parts, repair visits
An E with a number and a beep on a Thermador wall oven is an error code the Thermador manual does not decode. Press TIMERS or any key to stop the beeping, reset the oven if necessary, and book a visit if the code returns.
One reset appears on Thermador's oven support page and in its built-in oven guides for a door that will not release even when the oven is cool: cut the oven's power at the circuit breaker, wait five minutes, restore power and let the oven reset itself. While a self-clean cycle runs, a shut door is expected.
Book a diagnostic made for your exact model and performed at the appliance itself.
Where the offices are, and what to tell us about getting in.